Fuel Priming Pump - Remove and Install
拆卸步骤
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 拆下螺栓 (1 ) 。
Show/hide table
图 1 | g01292755 |
- 拆下燃油注油泵 (2) 和垫片。
安装步骤
- 将衬垫和燃油注油泵 (2) 安置到燃油滤清器座上。
Show/hide table
图 2 | g01292755 |
- 安装螺栓 (1) 。
Caterpillar Information System:
C13 Engine Engine Oil Filter Base and Oil Cooler - Remove
C13 Engine Engine Oil Filter Base and Oil Cooler - Install
2006/10/16 Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785}
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Personal Computer to UPS Connection
C13 Engine Inlet Air Temperature Sensor - Remove and Install
C13 Engine Inlet Manifold Temperature Sensor - Remove and Install
C13 Engine Coolant Temperature Sensor - Remove and Install
C13 Engine Cylinder Head - Install
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Monitoring System
C175-16 Petroleum Engines Engine Harness
2006/08/01 New Pressure Sensors Are Now Available {1718, 1917, 1923, 1924}
C13 Engine Cylinder Head - Remove
2006/08/01 Improved Support for the Precooler is Now Used {105P, 1380}
C27 and C32 Generator Set Engines Fuel Filter Base - Remove
C27 and C32 Generator Set Engines Fuel Filter Base - Install
C15 and C18 Petrolem Generator Set Engines Symptom Troubleshooting
C27 and C32 Generator Set Engines Fuel Pressure Sensor - Remove and Install
C27 and C32 Generator Set Engines Fuel Temperature Sensor - Remove and Install
C27 and C32 Generator Set Engines Fuel Filter and Water Separator - Remove and Install
C27 and C32 Generator Set Engines Radiator Core - Remove
C15 and C18 Petrolem Generator Set Engines Alternator Problem - Charging Problem and/or Noisy Operation
C15 and C18 Petrolem Generator Set Engines Coolant Contains Fuel
3408E and 3412E Engines for Caterpillar Built Machines Engine Has Mechanical Noise (Knock)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Vacuum Pump Startup - Required Procedure After Extended Storage