Inspection and/or Repair Procedure to Replace Crankshafts on Truck Engines {1202}
- Engine:
- 3406 (S/N: 92U1-UP)
- Truck Engines:
- 3406C TRUCK (S/N: 8PN1-UP)
- 3406B (S/N: 7FB1-UP; 8TC1-UP; 4MG1-UP; 5YG1-UP; 3ZJ1-UP; 5KJ1-UP; 2EK1-UP; 4CK1-UP)
- 3406C (S/N: 4MG1-UP; 3ZJ1-UP; 5KJ1-UP; 4CK1-UP)
- 3406E (S/N: 5EK1-UP; 1MM1-UP; 2WS1-UP; 4AS1-UP; 5DS1-UP; 6TS1-UP; 1LW1-UP)
- C-15 (S/N: EGH1-UP; MBN1-UP; 6NZ1-UP; 9NZ1-UP)
- C-16 (S/N: 7CZ1-UP)
- C-18 (S/N: MDP1-UP)
- C15 (S/N: SDP1-UP; BXS1-UP; MXS1-UP)
When the crankshaft needs repair for the above listed engines, refer to Special Instruction, REHS1653. This procedure was developed in order to provide a higher quality and a lower repair cost for crankshafts. Caterpillar recommends reading and understanding this procedure completely before attempting any of the repairs that are described.
Table 1 shows a list of part numbers that may be used in the above listed engines.
Show/hide table
List of Part Numbers     | |
Part Number     | Description     |
6I-1453     | Crankshaft     |
0R-3973     | Crankshaft     |
136-8882     | Crankshaft     |
0R-3972     | Crankshaft     |
160-1799     | Crankshaft     |
0R-9443     | Crankshaft     |
4P-4334     | Crankshaft     |
137-5920     | Crankshaft     |
4P-9121     | Crankshaft     |
155-6632     | Crankshaft     |
0R-6720     | Crankshaft     |
0R-3260     | Crankshaft     |
221-9360     | Crankshaft     |
156-8536     | Crankshaft     |
0R-9444     | Crankshaft     |
189-4918     | Crankshaft     |
133-6302     | Crankshaft     |
1W-6207     | Crankshaft     |
0R-9253     | Crankshaft     |
2W-2585     | Crankshaft     |
9Y-9112     | Crankshaft     |
132-1116     | Crankshaft     |
1W-6206     | Crankshaft     |
4N-0741     | Crankshaft Gp     |
0R-9905     | Crankshaft     |
0R-9906     | Crankshaft     |
9Y-8581     | Crankshaft     |
241-2658     | Crankshaft     |
Caterpillar Information System:
C7 On-Highway Engine Engine Oil Pump - Install
C7 On-Highway Engine Engine Oil Pump - Remove
2006/05/15 An Improved Jacket Water Pump is Used by Certain G3500B, G3500C, and G3500E Engines {1361}
C4.4 Industrial Engine Camshaft
C4.4 Industrial Engine Air Inlet and Exhaust System
G3408C and G3412C Engines Engine Valve Lash - Inspect/Adjust
3512B Oil Well Servicing Engines Fuel Priming Pump
CX31-P600 Petroleum Transmission Transmission Hydraulic Control
3500B Industrial Engines with the ADEM 3 Electronic Control Module Customer Parameters Worksheet
CX38-P892 Well Servicing Transmission Operational Checks
C9 Industrial Engines Fuel System
C175 Generator Sets Driven Equipment - Check
G3406 Engine Ignition Systems
2006/05/01 Inspection and/or Repair Procedure to Replace Crankshafts on Industrial Engines {1202}
C11 and C13 Engines Piston and Rings
C4.4 Industrial Engine Flywheel Housing
C4.4 Industrial Engine Crankcase Breather
CX31 On-Highway Transmission Power Train Hydraulic System
CX28 On-Highway Transmission Torque Converter Housing
False 444-5 Start Relay Open Diagnostic Code on 3500B Marine Propulsion Engines{1426} False 444-5 Start Relay Open Diagnostic Code on 3500B Marine Propulsion Engines{1426}
2006/04/24 A New Cooling System Application and Installation Guide is Now Available {1350}
C13 Engine Water Pump - Remove
C13 Engine Water Pump - Install
2006/05/15 Uninterruptible Power Supply (UPS) Serviceability of the Flywheel Bearing {4480, 7551}