Torque Converter Housing
Show/hide table
Illustration 1 | g01517045 |
(2) Lubricate the bore lightly. Use the lubricant to be sealed.
(1) Lubricate the sealing lip lightly. Use the lubricant to be sealed.
Shimming Procedure
Show/hide table
Illustration 2 | g01533302 |
(A) The distance from the bolt flange to the outer bearing support of the bearing housing
(B) The distance from the bolt flange to the outer diameter of the bearing of the torque converter housing
(C) The shim thickness is equal to (B) minus (A).
Note: All shims should error toward the large size, or not error at all.
(3) 296-2741 Shim Pack
- Quantity of each shim ... 1
- Thickness of shim ... 0.2 mm (0.008 inch)
- Thickness of shim ... 0.1 mm (0.004 inch)
- Thickness of shim ... 0.1 mm (0.004 inch)
- Thickness of shim ... 0.05 mm (0.002 inch)
- Thickness of shim ... 0.2 mm (0.008 inch)
Caterpillar Information System:
CX31 On-Highway Transmission Power Train Hydraulic System
C4.4 Industrial Engine Crankcase Breather
C4.4 Industrial Engine Flywheel Housing
C11 and C13 Engines Piston and Rings
2006/05/01 Inspection and/or Repair Procedure to Replace Crankshafts on Industrial Engines {1202}
G3406 Engine Ignition Systems
2009/10/29 Inspection and/or Repair Procedure to Replace Crankshafts on Truck Engines {1202}
C7 On-Highway Engine Engine Oil Pump - Install
C7 On-Highway Engine Engine Oil Pump - Remove
2006/05/15 An Improved Jacket Water Pump is Used by Certain G3500B, G3500C, and G3500E Engines {1361}
C4.4 Industrial Engine Camshaft
C4.4 Industrial Engine Air Inlet and Exhaust System
False 444-5 Start Relay Open Diagnostic Code on 3500B Marine Propulsion Engines{1426} False 444-5 Start Relay Open Diagnostic Code on 3500B Marine Propulsion Engines{1426}
2006/04/24 A New Cooling System Application and Installation Guide is Now Available {1350}
C13 Engine Water Pump - Remove
C13 Engine Water Pump - Install
2006/05/15 Uninterruptible Power Supply (UPS) Serviceability of the Flywheel Bearing {4480, 7551}
C7 On-Highway Engine Fuel Lines - Remove and Install
C4.4 Industrial Engine Turbocharger
C13 Engine Engine Oil Pump - Remove
C7 On-Highway Engine Unit Injector - Remove
3500B Industrial Engines with the ADEM 3 Electronic Control Module Air Shutoff System
345D, 349D and 349D2 Excavator Machine System Specifications Sensor Lines (Overload Warning)
2006/04/24 A 117-9712 Drive Idler Shaft Must be Used {1151, 1162, 1206}