CX31 On-Highway Transmission Caterpillar


Power Train Hydraulic System

Usage:

CX31 B3X
The hydraulic system for the power train supplies oil to the torque converter and the planetary transmission.

Transmission Hydraulic System




Illustration 1g02571256

(1) Oil filter bypass valve

(2) Modulating valve (Torque converter lockup clutch)

(3) Transmission hydraulic control relief valve

(4) Transmission oil temperature sensor

(5) Modulating valves (Electronic clutch pressure control)

(6) Torque converter inlet relief valve

(7) Transmission oil filter

(8) Torque converter lockup clutch

(9) Torque converter

(10) Oil cooler

(11) Transmission oil pump

(12) Transmission lubrication

(13) Transmission oil temperature sensor

(14) Scavenge screen

(15) Sump

(16) Torque converter outlet relief valve

(17) Lube flow diverter valve

(18) Torque converter flow valve




Illustration 2g02571316

(1) Oil filter bypass valve

(2) Modulating valve (Torque converter lockup clutch)

(3) Transmission hydraulic control relief valve

(4) Transmission oil temperature sensor

(5) Modulating valves (Electronic clutch pressure control)

(6) Torque converter inlet relief valve

(7) Transmission oil filter

(8) Torque converter lockup clutch

(9) Torque converter

(10) Oil cooler

(11) Transmission oil pump

(12) Transmission lubrication

(13) Transmission oil temperature sensor

(14) Scavenge screen

(15) Sump

(16) Torque converter outlet relief valve

(17) Lube flow diverter valve

(18) Torque converter flow valve

The transmission is controlled, cooled, and lubricated by oil that is supplied from sump (15) of the planetary transmission by transmission oil pump (11) .

Oil is taken from the sump of the planetary transmission by the transmission oil pump. Oil is fed via transmission oil filter (7) to the following components:

  • Modulating Valve (Torque Converter Lockup Clutch)

  • Modulating Valves (Electronic Clutch Pressure Control)

  • Transmission Hydraulic Control Relief Valve

Test points for oil pressure and an oil temperature sensor are incorporated in the hydraulic system.

Control of the planetary transmission is achieved by electronically activated modulating valves (5) that allow oil to fill the various clutches in the planetary transmission.

Torque converter (9) allows the power to be transmitted smoothly from the engine to the planetary transmission. The torque converter allows the speeds of the engine and the transmission to be matched smoothly. Once the speeds are matched, modulating valve (2) for torque converter lockup clutch (8) engages torque converter lockup clutch (8) in torque converter (9). The torque converter provides drive from the engine to the planetary transmission.

Oil is fed to the torque converter and the oil transmits the drive from the engine to the planetary transmission. Outlet oil from the torque converter goes via torque converter outlet relief valve (16) to the oil cooler and forward as lubricant for transmission (12) .

Caterpillar Information System:

C4.4 Industrial Engine Crankcase Breather
C4.4 Industrial Engine Flywheel Housing
C11 and C13 Engines Piston and Rings
2006/05/01 Inspection and/or Repair Procedure to Replace Crankshafts on Industrial Engines {1202}
G3406 Engine Ignition Systems
2009/10/29 Inspection and/or Repair Procedure to Replace Crankshafts on Truck Engines {1202}
C7 On-Highway Engine Engine Oil Pump - Install
C7 On-Highway Engine Engine Oil Pump - Remove
2006/05/15 An Improved Jacket Water Pump is Used by Certain G3500B, G3500C, and G3500E Engines {1361}
C4.4 Industrial Engine Camshaft
C4.4 Industrial Engine Air Inlet and Exhaust System
G3408C and G3412C Engines Engine Valve Lash - Inspect/Adjust
CX28 On-Highway Transmission Torque Converter Housing
False 444-5 Start Relay Open Diagnostic Code on 3500B Marine Propulsion Engines{1426} False 444-5 Start Relay Open Diagnostic Code on 3500B Marine Propulsion Engines{1426}
2006/04/24 A New Cooling System Application and Installation Guide is Now Available {1350}
C13 Engine Water Pump - Remove
C13 Engine Water Pump - Install
2006/05/15 Uninterruptible Power Supply (UPS) Serviceability of the Flywheel Bearing {4480, 7551}
C7 On-Highway Engine Fuel Lines - Remove and Install
C4.4 Industrial Engine Turbocharger
C13 Engine Engine Oil Pump - Remove
C7 On-Highway Engine Unit Injector - Remove
3500B Industrial Engines with the ADEM 3 Electronic Control Module Air Shutoff System
345D, 349D and 349D2 Excavator Machine System Specifications Sensor Lines (Overload Warning)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.