Engine Oil Pump - Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install the O-ring seals. Position engine oil pump (2) on the cylinder block.
- Install bolts (1) and bolt (3).
Show/hide table
| |
| Illustration 1 | g01263769 |
End By:
- Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Caterpillar Information System:
C7 On-Highway Engine Engine Oil Pump - Remove
2006/05/15 An Improved Jacket Water Pump is Used by Certain G3500B, G3500C, and G3500E Engines {1361}
C4.4 Industrial Engine Camshaft
C4.4 Industrial Engine Air Inlet and Exhaust System
G3408C and G3412C Engines Engine Valve Lash - Inspect/Adjust
3512B Oil Well Servicing Engines Fuel Priming Pump
CX31-P600 Petroleum Transmission Transmission Hydraulic Control
3500B Industrial Engines with the ADEM 3 Electronic Control Module Customer Parameters Worksheet
CX38-P892 Well Servicing Transmission Operational Checks
C9 Industrial Engines Fuel System
C175 Generator Sets Driven Equipment - Check
3500B Industrial Engines with the ADEM 3 Electronic Control Module System Configuration Parameters
2009/10/29 Inspection and/or Repair Procedure to Replace Crankshafts on Truck Engines {1202}
G3406 Engine Ignition Systems
2006/05/01 Inspection and/or Repair Procedure to Replace Crankshafts on Industrial Engines {1202}
C11 and C13 Engines Piston and Rings
C4.4 Industrial Engine Flywheel Housing
C4.4 Industrial Engine Crankcase Breather
CX31 On-Highway Transmission Power Train Hydraulic System
CX28 On-Highway Transmission Torque Converter Housing
False 444-5 Start Relay Open Diagnostic Code on 3500B Marine Propulsion Engines{1426} False 444-5 Start Relay Open Diagnostic Code on 3500B Marine Propulsion Engines{1426}
2006/04/24 A New Cooling System Application and Installation Guide is Now Available {1350}
C13 Engine Water Pump - Remove
C13 Engine Water Pump - Install