Fuel Priming Pump
Show/hide table
| |
| Illustration 1 | g03335080 |
Show/hide table
| Specification for 165-9154 Fuel Priming Pump Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 8C-6561 Bolt | Torque to |
Show/hide table
| |
| Illustration 2 | g03335081 |
|
183-2823 Fuel Priming Pump As | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 2 | 1 | 157-1490 Seal | Lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
Show/hide table
| |
| Illustration 3 | g03335082 |
|
229-3218 Valve As | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 3 | 1 | 7E-2981 Spring | Length under test force is Test force is Free length after test is |
Show/hide table
| |
| Illustration 4 | g03335083 |
|
326-6491 Priming Pump Rod Assembly | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 4 | 1 | 148-3489 Priming Pump Head | Apply green Loctite 620 to the joint at assembly and press rod into the head until the shoulder bottoms slip torque of |
| 5 | - | - | Surface must be dry and free of oil. |
| 6 | 1 | 148-3491 Priming Pump Bushing | Press the bushing into the knob until the shoulder bottoms slip torque of |
Caterpillar Information System:
CX31-P600 Petroleum Transmission Transmission Hydraulic Control
3500B Industrial Engines with the ADEM 3 Electronic Control Module Customer Parameters Worksheet
CX38-P892 Well Servicing Transmission Operational Checks
C9 Industrial Engines Fuel System
C175 Generator Sets Driven Equipment - Check
3500B Industrial Engines with the ADEM 3 Electronic Control Module System Configuration Parameters
C9 Industrial Engines General Information
BA-921 Bendix Air Compressor Unloader Piston - Remove
BA-921 Bendix Air Compressor Unloader Piston - Install
2006/06/12 Improved Elbows are Used for Inlet Air {1071}
CX31-P600 Petroleum Transmission Speed Sensor (Transmission)
3500B Industrial Engines with the ADEM 3 Electronic Control Module Event Code List
G3408C and G3412C Engines Engine Valve Lash - Inspect/Adjust
C4.4 Industrial Engine Air Inlet and Exhaust System
C4.4 Industrial Engine Camshaft
2006/05/15 An Improved Jacket Water Pump is Used by Certain G3500B, G3500C, and G3500E Engines {1361}
C7 On-Highway Engine Engine Oil Pump - Remove
C7 On-Highway Engine Engine Oil Pump - Install
2009/10/29 Inspection and/or Repair Procedure to Replace Crankshafts on Truck Engines {1202}
G3406 Engine Ignition Systems
2006/05/01 Inspection and/or Repair Procedure to Replace Crankshafts on Industrial Engines {1202}
C11 and C13 Engines Piston and Rings
C4.4 Industrial Engine Flywheel Housing
C4.4 Industrial Engine Crankcase Breather