Improved Elbows are Used for Inlet Air {1071}
- Engine:
- G3516C (S/N: DKR1-UP; RWA1-UP)
- Generator Set:
- G3516C (S/N: GZZ1-UP)
- G3516E (S/N: GHP1-UP; GAS1-UP)
- G3520C (S/N: GDB1-UP; JBX1-UP; JBZ1-UP)
- G3520E (S/N: GHR1-UP)
Description of Change: Improved elbows are used for the inlet air system on G3516 and G3520 Generator Set Engines.
Adaptable To: The 206-4164 Air Lines Gp has changed. Two new elbows have been released in order to replace the 206-4166 Elbow and the 206-4167 Elbow. The new 277-3573 Elbow and the new 277-3574 Elbow have been designed in order to reduce thermal growth. A sampling port has been added to each new elbow in order to monitor the outlet pressure from the compressor.
The new elbows are adaptable to the engines and to the generator sets that are listed above.
Caterpillar Information System:
CX31-P600 Petroleum Transmission Speed Sensor (Transmission)
3500B Industrial Engines with the ADEM 3 Electronic Control Module Event Code List
SR5 Electric Power Generation Bearing - Remove and Install
SR5 Electric Power Generation Coupling - Install
SR5 Electric Power Generation Coupling - Remove
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies AC Output Current - Calibrate
SR5 Electric Power Generation Generator - Align
SR5 Electric Power Generation Generator - Install
SR5 Electric Power Generation Generator - Remove
C7 On-Highway Engine Camshaft Idler Gear - Remove and Install
SR5 Electric Power Generation Rotor - Remove and Install
C7 On-Highway Engine Housing (Front) - Install
BA-921 Bendix Air Compressor Unloader Piston - Install
BA-921 Bendix Air Compressor Unloader Piston - Remove
C9 Industrial Engines General Information
3500B Industrial Engines with the ADEM 3 Electronic Control Module System Configuration Parameters
C175 Generator Sets Driven Equipment - Check
C9 Industrial Engines Fuel System
CX38-P892 Well Servicing Transmission Operational Checks
3500B Industrial Engines with the ADEM 3 Electronic Control Module Customer Parameters Worksheet
CX31-P600 Petroleum Transmission Transmission Hydraulic Control
3512B Oil Well Servicing Engines Fuel Priming Pump
G3408C and G3412C Engines Engine Valve Lash - Inspect/Adjust
C4.4 Industrial Engine Air Inlet and Exhaust System