C4.4 Industrial Engine Caterpillar


Camshaft

Usage:

C4.4 444



图 1g00987750

检查凸轮轴的端隙

(1) 凸轮轴的端隙 ... 0.126 至 0.558 mm (0.0050 至 0.0220 in)

磨损凸轮轴的最大允许轴向间隙 ... 0.62 mm (0.0244 in)




图 2g01195129

典型实例

(2) 螺栓

将螺栓拧紧至下述扭矩。 ... 95 N·m (70 lb ft)

(3) 下表给出了凸轮轴轴颈的直径。

表 1
凸轮轴轴颈     标准直径    
1    
50.711 至 50.737 mm (1.9965 至 1.9975 in)    
2    
50.457 至 50.483 mm (1.9865 至 1.9875 in)    
3    
49.949 至 49.975 mm (1.9665 至 1.9675 in)    

凸轮轴轴颈的最大磨损量 ... 0.05 mm (0.0021 in)

检查凸轮轴凸轮有无可见损伤。 如果安装了新的凸轮轴,则必须安装新的挺杆。

Caterpillar Information System:

C4.4 Industrial Engine Air Inlet and Exhaust System
G3408C and G3412C Engines Engine Valve Lash - Inspect/Adjust
3512B Oil Well Servicing Engines Fuel Priming Pump
CX31-P600 Petroleum Transmission Transmission Hydraulic Control
3500B Industrial Engines with the ADEM 3 Electronic Control Module Customer Parameters Worksheet
CX38-P892 Well Servicing Transmission Operational Checks
C9 Industrial Engines Fuel System
C175 Generator Sets Driven Equipment - Check
3500B Industrial Engines with the ADEM 3 Electronic Control Module System Configuration Parameters
C9 Industrial Engines General Information
BA-921 Bendix Air Compressor Unloader Piston - Remove
BA-921 Bendix Air Compressor Unloader Piston - Install
2006/05/15 An Improved Jacket Water Pump is Used by Certain G3500B, G3500C, and G3500E Engines {1361}
C7 On-Highway Engine Engine Oil Pump - Remove
C7 On-Highway Engine Engine Oil Pump - Install
2009/10/29 Inspection and/or Repair Procedure to Replace Crankshafts on Truck Engines {1202}
G3406 Engine Ignition Systems
2006/05/01 Inspection and/or Repair Procedure to Replace Crankshafts on Industrial Engines {1202}
C11 and C13 Engines Piston and Rings
C4.4 Industrial Engine Flywheel Housing
C4.4 Industrial Engine Crankcase Breather
CX31 On-Highway Transmission Power Train Hydraulic System
CX28 On-Highway Transmission Torque Converter Housing
False 444-5 Start Relay Open Diagnostic Code on 3500B Marine Propulsion Engines{1426} False 444-5 Start Relay Open Diagnostic Code on 3500B Marine Propulsion Engines{1426}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.