Piston Pump (Implement Pilot) (Axle Oil Cooler) - Install
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Attach a suitable lifting device to piston pump (3). The weight of piston pump (3) is approximately
34 kg (75 lb) . Install piston pump (3). Connect hose assemblies (1) and (2).
Show/hide table
| |
| Illustration 1 | g01456432 |
End By:
- Install the hydraulic tank. Refer to Disassembly and Assembly , "Hydraulic Tank (Implement, Hydraulic Fan) - Install".
Caterpillar Information System:
993K Wheel Loader Machine Systems Tilt Lever - Install
993K Wheel Loader Machine Systems Control Manifold (Operator Lift) (Main) - Install
993K Wheel Loader Machine Systems Hydraulic Tank (Operator Lift) - Install
613G Wheel Tractor-Scraper Hydraulic System Machine Preparation for Troubleshooting
584 and 584HD Forwarders Camera - If Equipped
2008/08/25 Improvements Have Been Made to the Fuel Level Sensor Group {1273, 7481}
993K Wheel Loader Machine Systems Cab Blower (Air Conditioner, Heater Fan) - Install
993K Wheel Loader Machine Systems Access Platform (Operator Lift) - Install
993K Wheel Loader Machine Systems Ride Control Valve - Install
2008/10/27 A New U-Cup Seal Updates the Servo Steering Cylinder {4315}
613G Wheel Tractor-Scraper Power Train Torque Converter Inlet Oil Pressure - Test
2008/08/25 Improved Lower Pin Joint for Bucket {6107, 6108, 6109, 6118}
613G Wheel Tractor-Scraper Machine Systems General Information
993K Wheel Loader Machine Systems Main Control Valve (LH) - Install
993K Wheel Loader Machine Systems Hydraulic Tank (Implement, Hydraulic Fan) - Install
Filtration Procedure Wheel Tractor Scraper Transmission Oil {0680, 0768, 3016, 3030} Filtration Procedure Wheel Tractor Scraper Transmission Oil {0680, 0768, 3016, 3030}
966H and 972H Wheel Loaders Mirror - If Equipped
993K Wheel Loader Machine Systems Hydraulic Tank (Steering) (Brake) - Install
2008/09/29 A New Torque Converter Group Is Used {3101}
993K Wheel Loader Machine Systems Piston Pump (Implement) - Install - Front and Rear, RH
993K Wheel Loader Machine Systems Hydraulic Tank (Implement, Hydraulic Fan) - Assemble
993K Wheel Loader Power Train Axle Oil Cooler (Front) - Install
993K Wheel Loader Engine Supplement Engine Oil Cooler - Install
993K Wheel Loader Power Train Tire and Rim (Front) - Remove and Install