- Wheel Tractor-Scraper:
- 621E (S/N: 6AB835-UP; 2PD740-UP)
- 621F (S/N: 4SK1-UP; 8PL1-UP)
- 621G (S/N: DBB1-UP; CEN1-UP; ALP1-UP)
- 621S (S/N: 8KD628-UP)
- 623E (S/N: 6CB674-UP; 6YF1-UP)
- 623F (S/N: 6BK1-UP; 5EW1-UP)
- 623G (S/N: DBC1-UP; CES1-UP; ARW1-UP)
- 627E (S/N: 6EB505-UP; 6GB589-UP; 7CG1-UP)
- 627F (S/N: 1DL1-UP)
- 627G (S/N: DBD1-UP; AXF1-UP; CEX1-UP)
- 631E (S/N: 1AB772-1445; 3ND318-522)
- 631ESeries II (S/N: 1AB1446-UP; 3ND523-UP)
- 631G (S/N: DFA1-UP; AWK1-UP; CLR1-UP)
- 633ESeries II (S/N: 2PS1-UP)
- 637E (S/N: 1FB350-531; 1JB565-UP)
- 637Series II (S/N: 1FB532-UP)
- 637G (S/N: CEH1-UP; DFJ1-UP; AXT1-UP)
- 651E (S/N: 4YR1-UP; 89Z151-UP)
- 657E (S/N: 5YR1-UP; 6TR1-UP; 90Z180-UP; 91Z306-UP)
- 657G (S/N: W1B1-UP; W1C1-UP; A4G1-UP)
ReferenceSpecial Instruction, REHS4228, "Installation of the New U-cup Seals on the Servo Steering Cylinder"
Description of Change: A new U-cup seal is used in the servo steering cylinder. The new U-cup seal has a smaller inner diameter than the former seal. When the new U-cup seal is under oil pressure, the new U-cup seal will apply more pressure to the rod.
Adaptable To:
Illustration 1 | g01624954 |
Illustration 2 | g01624956 |
A view of area (A) |
Illustration 3 | g01624959 |
A view of area (B) |
The new 330-7286 U-Cup Seal (2) is a direct replacement for the former 6J-1878 Seal in the 9T-6685 Servo Steering Cylinder. The new U-cup seal is adaptable back to the beginning of production of the machines. The new U-cup seal became effective in production with the following machines: DBB642-UP, DBC504-UP, DBD895-UP, DFA365-UP, DFJ392-UP, W1B135-UP, W1C274-UP and A4G101-UP
Note: One U-cup seal is installed in both ends of the 9T-6685 Servo Steering Cylinder. The orientation of the U-cup seal in the cylinder is important. The groove (1) should always be installed toward the oil pressure or toward the piston. The oil pressure in the cylinder causes the U-cup seal to squeeze the rod.For the complete instructions that are needed in order to install the new U-cup seals, refer to Special Instruction, REHS4228, "Installation of the New U-cup Seals on the Servo Steering Cylinder".