993K Wheel Loader Machine Systems Caterpillar


Ride Control Valve - Install

Usage:

993K Z9K

Installation Procedure

Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.



    Illustration 1g01525009

  1. Install bracket (7). Install bolts (8).


    Illustration 2g01524989

  2. Install the bracket and ride control valve (5) as a unit. Install bolts (4). Connect harness assembly (6).


    Illustration 3g01524986

  3. Connect tube assemblies (2). Connect hose assemblies (3).


    Illustration 4g01524988

  4. Install panel (1).

Caterpillar Information System:

2008/10/27 A New U-Cup Seal Updates the Servo Steering Cylinder {4315}
613G Wheel Tractor-Scraper Power Train Torque Converter Inlet Oil Pressure - Test
2008/08/25 Improved Lower Pin Joint for Bucket {6107, 6108, 6109, 6118}
Installation Procedure For The New Duct Assembly{1405} Installation Procedure For The New Duct Assembly{1405}
C9.3 Engine for D7E Track-Type Tractor Electronic Control System Components
C9.3 Engine for D7E Track-Type Tractor General Information
Procedure to Rework Housings for the Installation of New Planetary Bolts{3030, 3064, 3105} Procedure to Rework Housings for the Installation of New Planetary Bolts{3030, 3064, 3105}
D3K, D4K and D5K Track-Type Tractors Caterpillar Approved Work Tools
D6K Track-Type Tractor Operator Controls
C4.4 Engines For Caterpillar Built Machines Engine Cranks but Will Not Start
993K Wheel Loader Machine Systems Piston Pump (Implement) - Remove - Front and Rear, RH
2008/08/18 New Software is Now Available for VIMS {7620}
993K Wheel Loader Machine Systems Access Platform (Operator Lift) - Install
993K Wheel Loader Machine Systems Cab Blower (Air Conditioner, Heater Fan) - Install
2008/08/25 Improvements Have Been Made to the Fuel Level Sensor Group {1273, 7481}
584 and 584HD Forwarders Camera - If Equipped
613G Wheel Tractor-Scraper Hydraulic System Machine Preparation for Troubleshooting
993K Wheel Loader Machine Systems Hydraulic Tank (Operator Lift) - Install
993K Wheel Loader Machine Systems Control Manifold (Operator Lift) (Main) - Install
993K Wheel Loader Machine Systems Tilt Lever - Install
993K Wheel Loader Machine Systems Piston Pump (Implement Pilot) (Axle Oil Cooler) - Install
613G Wheel Tractor-Scraper Machine Systems General Information
993K Wheel Loader Machine Systems Main Control Valve (LH) - Install
993K Wheel Loader Machine Systems Hydraulic Tank (Implement, Hydraulic Fan) - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.