Caterpillar Approved Work Tools
Hanya gunakan work tool yang diakui Caterpillar saja untuk menangani alat berat ini.
Catatan:
Jangan gunakan work tool Caterpillar pada alat berat yang tidak diakui oleh Caterpillar.
Show/hide table
| Work Tool yang Diakui Caterpillar | ||||||
| Work Tool Depan (1) | D3K | D4K | D5K | |||
| Lebar blade | XL | LGP | XL | LGP | XL | LGP |
| VPAT (2) 1,52 m3 (1,99 yd3) 2646 mm (104,2 inci) |
X | |||||
| VPAT 1,66 m3 (2,17 yd3) 3149 mm (124 inci) |
X | |||||
| VPAT 1,42 m3 (1,86 yd3) 2921 mm (115 inci) |
X | X | ||||
| VPAT 1,98 m3 (2,59 yd3) 2782 mm (109,5 inci) |
X | |||||
| VPAT 1,85 m3 (2,42 yd3) 3149 mm (124 inci) |
X | |||||
| VPAT 2,19 m3 (2,86 yd3) 2886 mm (113,6 inci) |
X | |||||
| VPAT 2,34 m3 (3,06 yd3) 3220 mm (126,7 inci) |
X | |||||
| VPAT 2,19 m3 (2,86 yd3) (produk Kehutanan) 2886 mm (113,6 inci) (3) |
X | |||||
| VPAT 2,09 m3 (2,73 yd3) 2921 mm (115 inci) |
X | |||||
| Work Tool Belakang | ||||||
| Track-Type Tractor Ripper Kecil | X | X | X | X | X | X |
| Track-Type Tractor Hystat Winch Kecil | X | X | X | X | X | X |
Show/hide table
| ( 1 ) | Semua work tool depan telah diakui untuk semua model yang diperlihatkan. Bagan menunjukkan rekomendasi penggunaan dari pabrik. |
| ( 2 ) | Blade VPAT adalah pitch variabel, sudut daya, dan kemiringan |
| ( 3 ) | Termasuk pelindung sikat dan lapisan moldboard yang lebih tebal |
Lihat "Spesifikasi" dalam buku petunjuk ini untuk mendapatkan tambahan informasi mengenai spesifikasi atau konfigurasi alat berat.
Untuk alat berat ini, hubungi dealer Caterpillar untuk work tool khusus yang direkomendasikan oleh Caterpillar. Hubungi dealer Caterpillar untuk daftar terbaru dari work tool yang direkomendasikan.
Caterpillar Information System:
D6K Track-Type Tractor Operator Controls
C4.4 Engines For Caterpillar Built Machines Engine Cranks but Will Not Start
993K Wheel Loader Machine Systems Piston Pump (Implement) - Remove - Front and Rear, RH
2008/08/18 New Software is Now Available for VIMS {7620}
C9.3 Engine for D7E Track-Type Tractor Fuel System
D7E Track-Type Tractor Power Train Final Drive - Disassemble
D3K, D4K and D5K Track-Type Tractors Seat Belt
New Routing for Hydraulic Lines{3016, 3024} New Routing for Hydraulic Lines{3016, 3024}
Tier I Level Emissions Engine Repower for the D10N Track-Type Tractor {1000, 7000} Tier I Level Emissions Engine Repower for the D10N Track-Type Tractor {1000, 7000}
2008/09/15 An Improved Engine Enclosure Support Strut is Now Available {7251}
2009/02/16 Correction to Disassembly and Assembly , "Front Suspension (Cylinder) - Disassemble" {7201}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300} Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Procedure to Rework Housings for the Installation of New Planetary Bolts{3030, 3064, 3105} Procedure to Rework Housings for the Installation of New Planetary Bolts{3030, 3064, 3105}
C9.3 Engine for D7E Track-Type Tractor General Information
C9.3 Engine for D7E Track-Type Tractor Electronic Control System Components
Installation Procedure For The New Duct Assembly{1405} Installation Procedure For The New Duct Assembly{1405}
2008/08/25 Improved Lower Pin Joint for Bucket {6107, 6108, 6109, 6118}
613G Wheel Tractor-Scraper Power Train Torque Converter Inlet Oil Pressure - Test
2008/10/27 A New U-Cup Seal Updates the Servo Steering Cylinder {4315}
993K Wheel Loader Machine Systems Ride Control Valve - Install
993K Wheel Loader Machine Systems Access Platform (Operator Lift) - Install
993K Wheel Loader Machine Systems Cab Blower (Air Conditioner, Heater Fan) - Install
2008/08/25 Improvements Have Been Made to the Fuel Level Sensor Group {1273, 7481}
584 and 584HD Forwarders Camera - If Equipped