Hydraulic Tank (Steering) (Brake) - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7575 | Link Bracket | 1 |
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Attach a suitable lifting device to hydraulic tank (15). The weight of hydraulic tank (15) is approximately
200 kg (440 lb) . Install brackets (14). Install hydraulic tank (15).Show/hide tableIllustration 3 g01457390 - Install hose (13). Install tube assembly (11). Connect hose assemblies (10). Connect harness assemblies (9). Install clamp (12).
Show/hide table
Illustration 4 g01457389 - Connect harness assembly (7). Connect hose assembly (8).
Show/hide table
Illustration 5 g01502700 - Attach a suitable lifting device to support (6). The weight of support (6) is approximately
40 kg (88 lb) . Install support (6).Show/hide tableIllustration 6 g01457716 - Attach Tooling (A) and a suitable lifting device to panel (5). The weight of panel (5) is approximately
45 kg (100 lb) . Install panel (5).Show/hide tableIllustration 7 g01457715 - Install bolts (4).
Show/hide table
Illustration 8 g01457714 - Install panels (3). Install handrails (2).
Show/hide table
Illustration 9 g01457712 - Install panels (1).
- Fill the hydraulic oil tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil (Steering) (Brake) - Change".
Show/hide table
Illustration 1 | g01457391 |
Show/hide table
Illustration 2 | g01457392 |
Caterpillar Information System:
966H and 972H Wheel Loaders Mirror - If Equipped
Filtration Procedure Wheel Tractor Scraper Transmission Oil {0680, 0768, 3016, 3030} Filtration Procedure Wheel Tractor Scraper Transmission Oil {0680, 0768, 3016, 3030}
993K Wheel Loader Machine Systems Hydraulic Tank (Implement, Hydraulic Fan) - Install
993K Wheel Loader Machine Systems Main Control Valve (LH) - Install
613G Wheel Tractor-Scraper Machine Systems General Information
993K Wheel Loader Machine Systems Piston Pump (Implement Pilot) (Axle Oil Cooler) - Install
993K Wheel Loader Machine Systems Tilt Lever - Install
993K Wheel Loader Machine Systems Control Manifold (Operator Lift) (Main) - Install
993K Wheel Loader Machine Systems Hydraulic Tank (Operator Lift) - Install
613G Wheel Tractor-Scraper Hydraulic System Machine Preparation for Troubleshooting
584 and 584HD Forwarders Camera - If Equipped
2008/08/25 Improvements Have Been Made to the Fuel Level Sensor Group {1273, 7481}
2008/09/29 A New Torque Converter Group Is Used {3101}
993K Wheel Loader Machine Systems Piston Pump (Implement) - Install - Front and Rear, RH
993K Wheel Loader Machine Systems Hydraulic Tank (Implement, Hydraulic Fan) - Assemble
993K Wheel Loader Power Train Axle Oil Cooler (Front) - Install
993K Wheel Loader Engine Supplement Engine Oil Cooler - Install
993K Wheel Loader Power Train Tire and Rim (Front) - Remove and Install
993K Wheel Loader Engine Supplement Makeup Valve (Hydraulic Fan Motor) - Assemble
IT38H Integrated Toolcarrier and 938H Wheel Loader Camera - Rear View Camera (If Equipped)
966H and 972H Wheel Loaders Camera
966H and 972H Wheel Loaders Restricted Visibility
Bench Test Procedure for a 651E, 657E, and 657G Tractor Transmissions{3030, 3073} Bench Test Procedure for a 651E, 657E, and 657G Tractor Transmissions{3030, 3073}
D3K, D4K and D5K Track-Type Tractors Fuel System Water Separator - Replace