Usage of the 293-4066 Fuel Injector Gp and 10R-4843 Fuel Injector Gp {1251, 1254, 1290, 1713}
- Mobile Hydraulic Power Unit:
- 330D MHPU (S/N: D3D1-UP)
- Wheel Tractor-Scraper:
- 627G (S/N: DBZ1-UP)
- 637G (S/N: DEX1-UP; DEY1-UP)
- Excavator:
- 330D (S/N: NBD1-UP; GGE1-UP; B6H1-UP; THJ1-UP; C5K1-UP; E4K1-UP; H3K1-UP; L2K1-UP; JJM1-UP; LEM1-UP; ERN1-UP; MWP1-UP; HAS1-UP; RAS1-UP; EDX1-UP; T2Y1-UP)
- Motor Grader:
- 160M (S/N: B9E1-UP; B9L1-UP)
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.
Problem
The 293-4066 Fuel Injector Gp and 10R-4843 Fuel Injector Gp are listed as replacement parts for the machines that are listed above. The 293-4066 Fuel Injector Gp and 10R-4843 Fuel Injector Gp are not acceptable for use as a replacement part.
Solution
If a repair of one or more fuel injectors is being performed, use the 293-4072 Fuel Injector Gp or a remanufactured equivalent for all above listed serial numbers except S/N:D3D1-UP. Use the 293-4073 Fuel Injector Gp or a remanufactured equivalent for S/N:D3D1-UP.
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Housing (Rear)
854K Wheel Dozer Mirror
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Seat Belt
2008/08/18 Improved Floodlights Are Now Available {1434}
C7 Engines for Caterpillar Built Machines Crankshaft Pulley
Installation Of A New Rollover Protective Structure (ROPS){7325} Installation Of A New Rollover Protective Structure (ROPS){7325}
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Control System - Adjust
2008/06/23 A New Switch for the Fuel Priming Pump is Available {1258, 7332}
993K Wheel Loader Engine Supplement Water Pump (Jacket Water) - Install
993K Wheel Loader Engine Supplement Turbocharger - Install
993K Wheel Loader Engine Supplement Radiator Core - Install
2015/04/03 Recommendations for Battery Charging for Genset Usage {1401, 1406}
613G Wheel Tractor-Scraper Hydraulic System Check Valve (Floor Cylinder)
613G Wheel Tractor-Scraper Hydraulic System Vane Pump (Elevator)
Installation of the 315-6302 Third Valve Rework Kit {5051} Installation of the 315-6302 Third Valve Rework Kit {5051}
613G Wheel Tractor-Scraper Hydraulic System Brake Control Valve - Service
2008/07/14 Correction to Specifications , "Pressure Reducing Valve (Pilot Oil)" {5467}
C27 and C32 Generator Set Engines Flywheel Housing
Procedure to Torque the Nuts on the Steering Lock Mechanism{3034} Procedure to Torque the Nuts on the Steering Lock Mechanism{3034}
2011/02/09 New Stops For The Track Adjuster Are Now Available {4157, 4158, 4159}
2008/06/30 Fuel Transfer Pump {1251}
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Product Lifting
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Customer Assistance
2008/06/30 A New Temperature Sensor Is Now Available {3194}