2008/07/14 Caterpillar


Correction to Specifications , "Pressure Reducing Valve (Pilot Oil)" {5467}

Usage:

AD30 DXR
Underground Articulated Truck:
AD30 (S/N: DXR309-366)
Service Magazine, SEPD0949, 14 July 2008, "Pressure Reducing Valve (Pilot Oil)". Disregard this article. Refer to the article that follows.Specifications, RENR8574, "AD30 Underground Articulated Truck Hydraulic System", "Pressure Reducing Valve (Pilot Oil)". This module is part of Service Manual, RENR8521 Volume II.

The information in the above module has changed. Add this information to the above module.

Pressure Reducing Valve (Pilot Oil)

Part No.: 329-0462

S/N: DXR309-366




Illustration 1g01029517

(1) Torque for the valve to the body ... 34 ± 3 N·m (25 ± 3 lb ft)

(2) Tighten the cap to a torque of ... 13 ± 2 N·m (10 ± 2 lb ft)

Note: The 329-0462 Pressure Reducing Valve (Pilot Oil) preset pressure has changed for this application. Ensure the 329-0462 Pressure Reducing Valve (Pilot Oil) is set to the following pressure.

Pressure setting ... 3620 ± 70 kPa (525 ± 10 psi)

Caterpillar Information System:

613G Wheel Tractor-Scraper Hydraulic System Brake Control Valve - Service
Installation of the 315-6302 Third Valve Rework Kit {5051} Installation of the 315-6302 Third Valve Rework Kit {5051}
613G Wheel Tractor-Scraper Hydraulic System Vane Pump (Elevator)
613G Wheel Tractor-Scraper Hydraulic System Check Valve (Floor Cylinder)
Usage of the 293-4066 Fuel Injector Gp and 10R-4843 Fuel Injector Gp {1251, 1254, 1290, 1713} Usage of the 293-4066 Fuel Injector Gp and 10R-4843 Fuel Injector Gp {1251, 1254, 1290, 1713}
C27 and C32 Engines for Caterpillar Built Machines Housing (Rear)
854K Wheel Dozer Mirror
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Seat Belt
2008/08/18 Improved Floodlights Are Now Available {1434}
C7 Engines for Caterpillar Built Machines Crankshaft Pulley
Installation Of A New Rollover Protective Structure (ROPS){7325} Installation Of A New Rollover Protective Structure (ROPS){7325}
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Control System - Adjust
C27 and C32 Generator Set Engines Flywheel Housing
Procedure to Torque the Nuts on the Steering Lock Mechanism{3034} Procedure to Torque the Nuts on the Steering Lock Mechanism{3034}
2011/02/09 New Stops For The Track Adjuster Are Now Available {4157, 4158, 4159}
2008/06/30 Fuel Transfer Pump {1251}
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Product Lifting
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Customer Assistance
2008/06/30 A New Temperature Sensor Is Now Available {3194}
D6T Track-Type Tractor Electronic Control Systems Electrical Connector - Inspect
2008/09/01 Understanding the Pallet Fork to Carriage Interface on Integrated Toolcarrier Carrier Systems {6136, 6402}
2008/10/20 A New Modular Handle Gp Is Available for the Joystick Control Gp {5705}
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0 Component Description
2008/08/11 The Torque for the Bolts and the Plugs on the Steering Pumps has Increased {5070}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.