Flywheel Housing
Show/hide table
| |
| Illustration 1 | g02568161 |
|
Rear view | |
Show/hide table
| |
| Illustration 2 | g02568076 |
|
Tightening sequence | |
Show/hide table
| Specification for 239-3646 Flywheel Housing Gp | |||
| Item | Qty | Part | Specification Description |
| - | - | - | Before installation of the flywheel housing, inspect the front face of the flywheel housing and the rear face of the rear housing. The components must be free of the following substances: oil, fuel, water, assembly compounds, and any other contaminants. |
| - | - | - | Check assembled installation depth of the crankshaft seal group with the crankshaft at maximum rearward position. |
| - | - | - | Use the following procedure to tighten the flywheel housing bolts. Tighten the bolts in the numerical sequence as shown in the Illustration 2. |
| 1 | 2 | 245-3803 Bolt | Tighten bolt (1) through bolt (2) to |
| 2 | 8 | 2H-6488 Bolt | Tighten bolt (3) through bolt (10) to |
| 3 | 24 | 0L-1143 Bolt | Tighten bolt (11) through bolt (34) to |
| 4 | - | - | The seal and the sleeve of the crankshaft seal group must not be used if the seal and the sleeve have been separated. |
| The seal driver must not contact the seal within the |
|||
| A | - | - | Distance from the sleeve to the seal is |
| C | - | - | Installation depth of the sleeve from the rear face of the crank shaft is |
Caterpillar Information System:
2008/07/14 Correction to Specifications , "Pressure Reducing Valve (Pilot Oil)" {5467}
613G Wheel Tractor-Scraper Hydraulic System Brake Control Valve - Service
Installation of the 315-6302 Third Valve Rework Kit {5051} Installation of the 315-6302 Third Valve Rework Kit {5051}
613G Wheel Tractor-Scraper Hydraulic System Vane Pump (Elevator)
613G Wheel Tractor-Scraper Hydraulic System Check Valve (Floor Cylinder)
Usage of the 293-4066 Fuel Injector Gp and 10R-4843 Fuel Injector Gp {1251, 1254, 1290, 1713} Usage of the 293-4066 Fuel Injector Gp and 10R-4843 Fuel Injector Gp {1251, 1254, 1290, 1713}
C27 and C32 Engines for Caterpillar Built Machines Housing (Rear)
854K Wheel Dozer Mirror
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Seat Belt
2008/08/18 Improved Floodlights Are Now Available {1434}
C7 Engines for Caterpillar Built Machines Crankshaft Pulley
Installation Of A New Rollover Protective Structure (ROPS){7325} Installation Of A New Rollover Protective Structure (ROPS){7325}
Procedure to Torque the Nuts on the Steering Lock Mechanism{3034} Procedure to Torque the Nuts on the Steering Lock Mechanism{3034}
2011/02/09 New Stops For The Track Adjuster Are Now Available {4157, 4158, 4159}
2008/06/30 Fuel Transfer Pump {1251}
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Product Lifting
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Customer Assistance
2008/06/30 A New Temperature Sensor Is Now Available {3194}
D6T Track-Type Tractor Electronic Control Systems Electrical Connector - Inspect
2008/09/01 Understanding the Pallet Fork to Carriage Interface on Integrated Toolcarrier Carrier Systems {6136, 6402}
2008/10/20 A New Modular Handle Gp Is Available for the Joystick Control Gp {5705}
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0 Component Description
2008/08/11 The Torque for the Bolts and the Plugs on the Steering Pumps has Increased {5070}
Steering Clutch and Brake Discs and Plates for Scrapers, Pipelayers, Track-Type Tractors, and Loaders {4100, 4255} Steering Clutch and Brake Discs and Plates for Scrapers, Pipelayers, Track-Type Tractors, and Loaders {4100, 4255}