Radiator Core - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 178-3704     | Lifting Bracket As     | 1     |
B     | 207-1601     | Rubber Lubricant     | 1     |
207-1600 (1) | Rubber Lubricant     | 1     |
Show/hide table
( 1 ) | EAME only |
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Install seal (7) .
Show/hide table
Illustration 1 | g01560879 |
- Apply Tooling (B) to radiator core (6). Install radiator core (6) .
Show/hide table
Illustration 2 | g01560431 |
- Install seal (5) .
Show/hide table
Illustration 3 | g01560430 |
- Install brackets (4). Install hoses (3).
Show/hide table
Illustration 4 | g01560428 |
- Attach Tooling (A) and a suitable lifting device to hood (2). The weight of hood (2) is approximately 45 kg (100 lb). Install hood (2).
Show/hide table
Illustration 5 | g01560456 |
Show/hide table
Illustration 6 | g01560455 |
- Attach a suitable lifting device to guard (1). The weight of guard (1) is approximately 45 kg (100 lb). Install guard (1).
End By: Install the fan motor. Refer to Disassembly and Assembly, "Fan and Piston Motor (Hydraulic Fan) - Install".
Caterpillar Information System:
2015/04/03 Recommendations for Battery Charging for Genset Usage {1401, 1406}
993K Wheel Loader Engine Supplement Makeup Valve (Hydraulic Fan Motor) - Install
993K Wheel Loader Engine Supplement Fuel Tank - Install
993K Wheel Loader Engine Supplement Engine - Install
993K Wheel Loader Engine Supplement Fan and Piston Motor (Hydraulic Fan) - Install
904H Compact Wheel Loader Power Train Foot Brake Control (Pedal)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Axles, Differential and Brakes Solenoid Valve and Mounting (Differential Lock)
2008/06/30 Correction to Systems Operation Testing and Adjusting , "Hydraulic Fan Speed - Test and Adjust" {1387, 5070}
2008/06/30 Grease Is Required For The Slip Joint On The Drive Shaft {3253}
993K Wheel Loader Machine Systems Demand Fan Valve - Install
2008/07/07 Improved Bearings for the Output Transfer Gear Case are Available {3075, 3159}
993K Wheel Loader Power Train Fixed Axle (Front) - Remove and Install
993K Wheel Loader Engine Supplement Turbocharger - Install
993K Wheel Loader Engine Supplement Water Pump (Jacket Water) - Install
2008/06/23 A New Switch for the Fuel Priming Pump is Available {1258, 7332}
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Control System - Adjust
Installation Of A New Rollover Protective Structure (ROPS){7325} Installation Of A New Rollover Protective Structure (ROPS){7325}
C7 Engines for Caterpillar Built Machines Crankshaft Pulley
2008/08/18 Improved Floodlights Are Now Available {1434}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Seat Belt
854K Wheel Dozer Mirror
C27 and C32 Engines for Caterpillar Built Machines Housing (Rear)
Usage of the 293-4066 Fuel Injector Gp and 10R-4843 Fuel Injector Gp {1251, 1254, 1290, 1713} Usage of the 293-4066 Fuel Injector Gp and 10R-4843 Fuel Injector Gp {1251, 1254, 1290, 1713}
613G Wheel Tractor-Scraper Hydraulic System Check Valve (Floor Cylinder)