Water Pump (Jacket Water) - Install
Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Install the O-ring seal onto water pump (11). Install water pump (11). Install bolts (12) and nuts (10) .
Show/hide table
 | |
| Illustration 1 | g01442653 |
- Install the O-ring seal onto cover assembly (8). Install cover assembly (8) and bolts (7). Install elbow (5). Connect hoses (6) and (9).
Show/hide table
 | |
| Illustration 2 | g01442650 |
- Install shields (4) .
Show/hide table
 | |
| Illustration 3 | g01442684 |
- Position lower grill (3). Install bolts (2).
Show/hide table
 | |
| Illustration 4 | g01442667 |
- Install upper grill (1) .
Show/hide table
 | |
| Illustration 5 | g01442666 |
End By: Fill the cooling system coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Caterpillar Information System:
993K Wheel Loader Engine Supplement Turbocharger - Install
993K Wheel Loader Engine Supplement Radiator Core - Install
2015/04/03 Recommendations for Battery Charging for Genset Usage {1401, 1406}
993K Wheel Loader Engine Supplement Makeup Valve (Hydraulic Fan Motor) - Install
993K Wheel Loader Engine Supplement Fuel Tank - Install
993K Wheel Loader Engine Supplement Engine - Install
993K Wheel Loader Engine Supplement Fan and Piston Motor (Hydraulic Fan) - Install
904H Compact Wheel Loader Power Train Foot Brake Control (Pedal)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Axles, Differential and Brakes Solenoid Valve and Mounting (Differential Lock)
2008/06/30 Correction to Systems Operation Testing and Adjusting , "Hydraulic Fan Speed - Test and Adjust" {1387, 5070}
2008/06/30 Grease Is Required For The Slip Joint On The Drive Shaft {3253}
993K Wheel Loader Machine Systems Demand Fan Valve - Install
2008/06/23 A New Switch for the Fuel Priming Pump is Available {1258, 7332}
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Control System - Adjust
Installation Of A New Rollover Protective Structure (ROPS){7325} Installation Of A New Rollover Protective Structure (ROPS){7325}
C7 Engines for Caterpillar Built Machines Crankshaft Pulley
2008/08/18 Improved Floodlights Are Now Available {1434}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Seat Belt
854K Wheel Dozer Mirror
C27 and C32 Engines for Caterpillar Built Machines Housing (Rear)
Usage of the 293-4066 Fuel Injector Gp and 10R-4843 Fuel Injector Gp {1251, 1254, 1290, 1713} Usage of the 293-4066 Fuel Injector Gp and 10R-4843 Fuel Injector Gp {1251, 1254, 1290, 1713}
613G Wheel Tractor-Scraper Hydraulic System Check Valve (Floor Cylinder)
613G Wheel Tractor-Scraper Hydraulic System Vane Pump (Elevator)
Installation of the 315-6302 Third Valve Rework Kit {5051} Installation of the 315-6302 Third Valve Rework Kit {5051}