Fuel Tank - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Brackets     | 3     |
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Attach Tooling (A) and a suitable lifting device to fuel tank (10). The weight of fuel tank (9) is approximately 999 kg (2200 lb). Install fuel tank (9). Install bolts (10) .
Show/hide table
Illustration 1 | g01458588 |
Show/hide table
Illustration 2 | g01458600 |
- Install any remaining clips (8) from the fuel tank.
Show/hide table
Illustration 3 | g01458635 |
- Install clamp (7) .
Show/hide table
Illustration 4 | g01458587 |
- Install clamp (6) .
Show/hide table
Illustration 5 | g01458533 |
- Install hose assembly (5) to the fuel tank. Connect hose assembly (5). Install bracket (4) .
Show/hide table
Illustration 6 | g01458532 |
- Install harness assemblies (3) to the fuel tank. Connect harness assemblies (3).
Show/hide table
Illustration 7 | g01458531 |
- Connect harness assembly (2) .
Show/hide table
Illustration 8 | g01458530 |
- Install guard (1) .
Show/hide table
Illustration 9 | g01458529 |
End By:
- Install the fuel heater. Refer to Disassembly and Assembly, "Fuel Heater - Install".
- Install the engine oil renewal tank. Refer to Disassembly and Assembly, " Engine Oil Tank (Metering, Oil Renewal System) - Install".
- Install the steering oil tank. Refer to Disassembly and Assembly, "Hydraulic Tank (Steering) (Brake)- Remove".
Caterpillar Information System:
993K Wheel Loader Engine Supplement Engine - Install
993K Wheel Loader Engine Supplement Fan and Piston Motor (Hydraulic Fan) - Install
904H Compact Wheel Loader Power Train Foot Brake Control (Pedal)
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Axles, Differential and Brakes Solenoid Valve and Mounting (Differential Lock)
2008/06/30 Correction to Systems Operation Testing and Adjusting , "Hydraulic Fan Speed - Test and Adjust" {1387, 5070}
2008/06/30 Grease Is Required For The Slip Joint On The Drive Shaft {3253}
993K Wheel Loader Machine Systems Demand Fan Valve - Install
2008/07/07 Improved Bearings for the Output Transfer Gear Case are Available {3075, 3159}
993K Wheel Loader Power Train Fixed Axle (Front) - Remove and Install
2008/06/23 New Power Train Software is Now Available {7620}
3512C and 3516C Marine Auxiliary and Generator Set Engines Generator Isolating for Maintenance
2008/07/14 New Primary Fuel Filters are Available {1260, 1261}
993K Wheel Loader Engine Supplement Makeup Valve (Hydraulic Fan Motor) - Install
2015/04/03 Recommendations for Battery Charging for Genset Usage {1401, 1406}
993K Wheel Loader Engine Supplement Radiator Core - Install
993K Wheel Loader Engine Supplement Turbocharger - Install
993K Wheel Loader Engine Supplement Water Pump (Jacket Water) - Install
2008/06/23 A New Switch for the Fuel Priming Pump is Available {1258, 7332}
988H, 988K, 990H, 990K, 992G, 992K, 993K, and 994K Wheel Loaders, and 854K Wheel Dozers Automatic Lubrication System (Hydraulic Actuated System) Control System - Adjust
Installation Of A New Rollover Protective Structure (ROPS){7325} Installation Of A New Rollover Protective Structure (ROPS){7325}
C7 Engines for Caterpillar Built Machines Crankshaft Pulley
2008/08/18 Improved Floodlights Are Now Available {1434}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Seat Belt
854K Wheel Dozer Mirror