Muffler - Remove and Install
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件名称 | 数量 |
| A | 138-7575 | 连杆支架 | 3 |
- 断开软管 (1) 。
Show/hide table
 | |
| 图 1 | g01288616 |
Show/hide table
 | |
| 图 2 | g01288618 |
- 松开夹箍 (2) ，然后拆下排气管 (3) 。
- 将工具 (A) 和适当的起吊设备连接到发动机罩 (5) 上。 发动机罩 (5) 的重量约为 50 kg (110 lb)。
- 拆下螺栓 (4) ，并使用适当的起吊设备拆下发动机罩 (5) 。
- 松开卡箍 (6) 。
Show/hide table
 | |
| 图 3 | g01288620 |
- 拆下螺栓 (7) 。
Show/hide table
 | |
| 图 4 | g01288623 |
- 需要用两个人拆卸消声器 (8) 。 消声器 (8) 的重量约为 30 kg (65 lb)。
安装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件名称 | 数量 |
| A | 138-7575 | 连杆支架 | 3 |
- 需要用两个人将消声器 (8) 定位到机器上。 消声器 (8) 的重量约为 30 kg (65 lb)。
Show/hide table
| | |
| 图 5 | g01288623 |
- 安装螺栓 (7) 。
- 拧紧卡箍 (6) 至扭矩为 6 ± 1 N·m (53 ± 9 lb in)。
Show/hide table
| | |
| 图 6 | g01288620 |
- 使用工具 (A) 和适当的起吊设备，将发动机罩 (5) 定位在机器上。 发动机罩 (5) 的重量约为 50 kg (110 lb)。
Show/hide table
| | |
| 图 7 | g01288618 |
Show/hide table
| | |
| 图 8 | g01288616 |
- 安装螺栓 (4) 。
- 安装排气管 (3) 并拧紧卡箍 (2) 。
- 连接软管 (1) 。
Caterpillar Information System:
D6G Series 2 Track-Type Tractor Emissions Certification Film
657G Wheel Tractor-Scraper Wheel Tractor Power Train Axle Housing - Remove and Install
657G Wheel Tractor-Scraper Wheel Tractor Power Train Wheel, Wheel Bearings and Duo-Cone Seals - Install
657G Wheel Tractor-Scraper Wheel Tractor Power Train Wheel, Wheel Bearings and Duo-Cone Seals - Remove
657G Wheel Tractor-Scraper Engine Supplement Air Cleaner - Remove and Install
Procedures For Installing Multi-Velocity Program (MVP) in the D6R Series III{1408, 7620} Procedures For Installing Multi-Velocity Program (MVP) in the D6R Series III{1408, 7620}
Reuse and Salvage for Connecting Rods {1218} Reuse and Salvage for Connecting Rods {1218}
657G Wheel Tractor-Scraper Engine Supplement Water Separator and Fuel Priming Pump - Remove and Install
657G Wheel Scraper Power Train Oil Filter Base (Transmission) - Remove and Install
657G Wheel Scraper Power Train Transmission Hydraulic Control - Install
657G Wheel Scraper Power Train Transmission Hydraulic Control - Remove
953D Track-Type Loader Engine Supplement Alternator - Remove and Install
657G Wheel Tractor-Scraper Engine Supplement Oil Pan - Remove and Install
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Major)
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Top End)
657G Wheel Tractor-Scraper Engine Supplement Engine Support (Rear) - Remove and Install
2006/08/07 A New Kit for the Cooling System Pressure Cap is Available {1353, 1354, 1382, 1392, 7405}
D7G Series 2 and D7G Series II Track-Type Tractors Lifting and Tying Down the Machine
966H and 972H Wheel Loaders Drive Shaft Support Bearing - Lubricate
966H and 972H Wheel Loaders Drive Shaft Universal Joints - Lubricate
657G Wheel Tractor-Scraper Engine Supplement Transmission Oil Cooler - Remove and Install
D7G Series 2 and D7G Series II Track-Type Tractors Additional Messages
D7G Series 2 and D7G Series II Track-Type Tractors Capacities (Refill)
Effectivity of the Upgrades to Remanufactured Transmissions, Torque Converters, and Wheel Assemblies{3030, 3101, 4051} Effectivity of the Upgrades to Remanufactured Transmissions, Torque Converters, and Wheel Assemblies{3030, 3101, 4051}