A New Kit for the Cooling System Pressure Cap is Available {1353, 1354, 1382, 1392, 7405}
- Engine: Commercial
- 3500 and 3500B Family All
- G3500 Family All
The new kit includes the pressure cap, a warning film, and instructions for installation of the film. The contents of the kit are listed in Table 1.
Show/hide table
| Contents of the 294-9052 Radiator Cap Kit | |
| Qty | Item |
| 1 | 4N-3311 Pressure Cap |
| 1 | 225-4256 Film |
| 1 | Special Instruction, REHS3001, "Installation of the 225-4256 Film" |
Show/hide table
 | |
| Illustration 1 | g01235683 |
225-4256 Film | |
Show/hide table
 |
Pressurized System: Hot coolant can cause serious burns. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. |
 |
Install the 225-4256 Film on a flat surface of the radiator or on the expansion tank near the cap. Make sure that the film will not be obstructed by any object.
When you replace a 4N-3311 Pressure Cap, use the 294-9052 Radiator Cap Kit.
Caterpillar Information System:
657G Wheel Tractor-Scraper Engine Supplement Engine Support (Rear) - Remove and Install
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Top End)
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Major)
657G Wheel Tractor-Scraper Engine Supplement Oil Pan - Remove and Install
657G Wheel Tractor-Scraper Engine Supplement Muffler - Remove and Install
D6G Series 2 Track-Type Tractor Emissions Certification Film
657G Wheel Tractor-Scraper Wheel Tractor Power Train Axle Housing - Remove and Install
657G Wheel Tractor-Scraper Wheel Tractor Power Train Wheel, Wheel Bearings and Duo-Cone Seals - Install
657G Wheel Tractor-Scraper Wheel Tractor Power Train Wheel, Wheel Bearings and Duo-Cone Seals - Remove
657G Wheel Tractor-Scraper Engine Supplement Air Cleaner - Remove and Install
Procedures For Installing Multi-Velocity Program (MVP) in the D6R Series III{1408, 7620} Procedures For Installing Multi-Velocity Program (MVP) in the D6R Series III{1408, 7620}
Reuse and Salvage for Connecting Rods {1218} Reuse and Salvage for Connecting Rods {1218}
D7G Series 2 and D7G Series II Track-Type Tractors Lifting and Tying Down the Machine
966H and 972H Wheel Loaders Drive Shaft Support Bearing - Lubricate
966H and 972H Wheel Loaders Drive Shaft Universal Joints - Lubricate
657G Wheel Tractor-Scraper Engine Supplement Transmission Oil Cooler - Remove and Install
D7G Series 2 and D7G Series II Track-Type Tractors Additional Messages
D7G Series 2 and D7G Series II Track-Type Tractors Capacities (Refill)
Effectivity of the Upgrades to Remanufactured Transmissions, Torque Converters, and Wheel Assemblies{3030, 3101, 4051} Effectivity of the Upgrades to Remanufactured Transmissions, Torque Converters, and Wheel Assemblies{3030, 3101, 4051}
657G Wheel Tractor-Scraper Wheel Tractor Power Train Transmission Hydraulic Control - Remove
657G Wheel Tractor-Scraper Wheel Tractor Power Train Transmission Hydraulic Control - Install
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Braking System Brake Accumulator
D7G Series 2 and D7G Series II Track-Type Tractors Fuel Tank Water and Sediment - Drain
953D Track-Type Loader Machine Systems Cab - Remove