Air Cleaner - Remove and Install
拆卸步骤
- 拆下螺栓 (2) 和滤网 (1) 。
Show/hide table
 | |
| 图 1 | g01288412 |
- 松开夹箍 (4) ，然后拆下管 (3) 。
Show/hide table
 | |
| 图 2 | g01288413 |
- 断开软管 (6) 。
- 松开螺栓 (5) 和卡箍 (8) 。
- 拆下粗滤器 (7) 。
- 断开支架 (9) 。
Show/hide table
 | |
| 图 3 | g01288415 |
- 断开软管 (10) 。
Show/hide table
 | |
| 图 4 | g01288416 |
- 需要用两个人拆卸螺栓 (5) 和空气滤清器 (11) 。 空气滤清器 (11) 的重量约为 30 kg (65 lb)。
Show/hide table
 | |
| 图 5 | g01288417 |
安装步骤
- 需要用两个人定位空气滤清器 (11) 并安装螺栓 (5) 。 此时不要拧紧螺栓 (5) 。空气滤清器 (12) 的重量约为 30 kg (65 lb)。
Show/hide table
| | |
| 图 6 | g01288417 |
- 连接软管 (10) 。
Show/hide table
| | |
| 图 7 | g01288416 |
- 连接支架 (9) 。
Show/hide table
| | |
| 图 8 | g01288415 |
- 安装粗滤器 (7) ，然后拧紧卡箍 (8) 和螺栓 (5) 。
Show/hide table
| | |
| 图 9 | g01288413 |
- 安装管 (3) 并拧紧卡箍 (4) 。
- 连接软管 (6) 。
- 安装滤网 (1) 和螺栓 (2) 。
Show/hide table
| | |
| 图 10 | g01288412 |
Caterpillar Information System:
Procedures For Installing Multi-Velocity Program (MVP) in the D6R Series III{1408, 7620} Procedures For Installing Multi-Velocity Program (MVP) in the D6R Series III{1408, 7620}
Reuse and Salvage for Connecting Rods {1218} Reuse and Salvage for Connecting Rods {1218}
657G Wheel Tractor-Scraper Engine Supplement Water Separator and Fuel Priming Pump - Remove and Install
657G Wheel Scraper Power Train Oil Filter Base (Transmission) - Remove and Install
657G Wheel Scraper Power Train Transmission Hydraulic Control - Install
657G Wheel Scraper Power Train Transmission Hydraulic Control - Remove
953D Track-Type Loader Engine Supplement Alternator - Remove and Install
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Solenoid Valve (Transmission Clutch)
Ampseal 16 Connector Peripheral Seal Servicing{7553} Ampseal 16 Connector Peripheral Seal Servicing{7553}
Tier I Level Emissions Engine Repower for a 990 Wheel Loader {1000} Tier I Level Emissions Engine Repower for a 990 Wheel Loader {1000}
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Speed Sensor (Torque Converter Output) (Transmission Output)
953D Track-Type Loader Engine Supplement Fuel Filter Base and Priming Pump - Remove and Install
657G Wheel Tractor-Scraper Wheel Tractor Power Train Wheel, Wheel Bearings and Duo-Cone Seals - Remove
657G Wheel Tractor-Scraper Wheel Tractor Power Train Wheel, Wheel Bearings and Duo-Cone Seals - Install
657G Wheel Tractor-Scraper Wheel Tractor Power Train Axle Housing - Remove and Install
D6G Series 2 Track-Type Tractor Emissions Certification Film
657G Wheel Tractor-Scraper Engine Supplement Muffler - Remove and Install
657G Wheel Tractor-Scraper Engine Supplement Oil Pan - Remove and Install
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Major)
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Top End)
657G Wheel Tractor-Scraper Engine Supplement Engine Support (Rear) - Remove and Install
2006/08/07 A New Kit for the Cooling System Pressure Cap is Available {1353, 1354, 1382, 1392, 7405}
D7G Series 2 and D7G Series II Track-Type Tractors Lifting and Tying Down the Machine
966H and 972H Wheel Loaders Drive Shaft Support Bearing - Lubricate