Transmission Hydraulic Control - Remove
拆卸步骤
开始:
- 卸下推拉挂钩。 请参阅拆解和组装, "推拉挂钩 - 拆卸和安装"。
注: 清洁度是一项重要的因素。 拆解步骤开始之前,应彻底清洁部件外部。 这将有助于防止脏污进入内部机构。
注: 为便于安装,在所有管路、所有软管、所有线束组件及所有管上做出识别标记。 插接好所有线路、软管和管路。 这将有助于防止液体泄漏和有助于防止污染物进入系统。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 拆卸盖 (1) 和 (2) 。
Show/hide table
图 1 | g01288258 |
- 断开线束组件 (3) 和线束组件 (11) 。
Show/hide table
图 2 | g01288259 |
- 断开夹子 (4) 和夹子 (10) 。
- 重新将线束组件 (8) 安置在旁边。
- 卸下螺栓 (7) 和阀 (5) 。
- 卸下螺栓 (9) 和盘 (6) 。
- 卸下套筒 (12) 和 O 形密封圈。
Show/hide table
图 3 | g01289153 |
- 从阀 (5) 上卸下挡圈 (14) 、联轴节组件 (13) 和 O 形密封圈 (15) 。
- 需要两个人,卸下螺栓 (16) 、螺栓 (17) 和阀 (18) 。 阀 (18) 的重量约为 27 kg (60 lb)。
Show/hide table
图 4 | g01288262 |
- 卸下螺栓 (19) 、螺栓 (20) 和阀 (21) 。
Show/hide table
图 5 | g01288264 |
- 卸下螺栓 (28) 和盘 (27) 。
Show/hide table
图 6 | g01288293 |
- 卸下螺栓 (26) 、阀体 (25) 和管 (24) 。
- 卸下螺栓 (22) 和歧管 (23) 。
Caterpillar Information System:
953D Track-Type Loader Engine Supplement Alternator - Remove and Install
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Solenoid Valve (Transmission Clutch)
Ampseal 16 Connector Peripheral Seal Servicing{7553} Ampseal 16 Connector Peripheral Seal Servicing{7553}
Tier I Level Emissions Engine Repower for a 990 Wheel Loader {1000} Tier I Level Emissions Engine Repower for a 990 Wheel Loader {1000}
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Speed Sensor (Torque Converter Output) (Transmission Output)
953D Track-Type Loader Engine Supplement Fuel Filter Base and Priming Pump - Remove and Install
2006/09/11 Correction to Operation and Maintenance Manual, "Differential and Final Drive Oil Level - Check {3258, 4050}
2006/09/11 Correction to Operation and Maintenance Manual, "Differential and Final Drive Oil - Change {3258, 4050}
2006/09/11 Correction to Operation and Maintenance Manual, "Sampling Interval and Location of Sampling Valve" {1000, 1318, 1348, 3080, 4070, 4250, 4300, 5050, 7000, 7542}
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Steering System Steering Neutralizer Valve
657G Wheel Tractor-Scraper Wheel Tractor Power Train Quick-Release Valve (Differential Lock) - Remove and Install
657G Wheel Tractor-Scraper Wheel Tractor Power Train Solenoid Valve (Differential Lock) - Remove and Install
657G Wheel Scraper Power Train Transmission Hydraulic Control - Install
657G Wheel Scraper Power Train Oil Filter Base (Transmission) - Remove and Install
657G Wheel Tractor-Scraper Engine Supplement Water Separator and Fuel Priming Pump - Remove and Install
Reuse and Salvage for Connecting Rods {1218} Reuse and Salvage for Connecting Rods {1218}
Procedures For Installing Multi-Velocity Program (MVP) in the D6R Series III{1408, 7620} Procedures For Installing Multi-Velocity Program (MVP) in the D6R Series III{1408, 7620}
657G Wheel Tractor-Scraper Engine Supplement Air Cleaner - Remove and Install
657G Wheel Tractor-Scraper Wheel Tractor Power Train Wheel, Wheel Bearings and Duo-Cone Seals - Remove
657G Wheel Tractor-Scraper Wheel Tractor Power Train Wheel, Wheel Bearings and Duo-Cone Seals - Install
657G Wheel Tractor-Scraper Wheel Tractor Power Train Axle Housing - Remove and Install
D6G Series 2 Track-Type Tractor Emissions Certification Film
657G Wheel Tractor-Scraper Engine Supplement Muffler - Remove and Install
657G Wheel Tractor-Scraper Engine Supplement Oil Pan - Remove and Install