Angle Cylinder (Bulldozer)
Show/hide table
Illustration 1 | g00868132 |
228-0320 Hydraulic Cylinder Gp |
(1) Use 185-3996 Thread Lock Compound on the threads before assembly.
(2) Put clean grease on the threads. Torque for the head ... 600 ± 130 N·m (440 ± 95 lb ft)
(3) Bore of new cylinder ... 101.60 ± 0.08 mm (4.000 ± 0.003 inch)
(4) Diameter of new rod ... 50.750 ± 0.038 mm (1.9980 ± 0.0015 inch)
(5) Bore of new head ... 51.13 ± 0.03 mm (2.0129 ± 0.0012 inch)
(6) Apply 4C-4032 Sealant to the wiper seal groove prior to assembly.
Note: Use the lubricant that is being sealed in order to lubricate the sealing lips in the head.
Caterpillar Information System:
854K Wheel Dozer Transmission Oil Level - Check
854K Wheel Dozer Transmission Oil Filter - Replace
D10T Track-Type Tractor Machine Systems Fast Fill Fuel Adapter
D7G Series 2 and D7G Series II Track-Type Tractors Safety Messages
D7G Series 2 and D7G Series II Track-Type Tractors Operator Controls
D6G Series 2 Track-Type Tractor Operator Controls
3508 EUI Engine for Off-Highway Truck/Tractors Muffler
525C, 535C and 545C Wheel Skidders Machine Systems Solenoid Valve and Manifold (Parking Brake Control) - Assemble
525C, 535C and 545C Wheel Skidders Machine Systems Solenoid Valve and Manifold (Parking Brake Control) - Disassemble
525C, 535C and 545C Wheel Skidders Machine Systems Solenoid Valve and Manifold (Parking Brake Control) - Install
525C, 535C and 545C Wheel Skidders Machine Systems Solenoid Valve and Manifold (Parking Brake Control) - Remove
Modes of Failure for Quick Disconnect Connectors {0618, 5057, 6129} Modes of Failure for Quick Disconnect Connectors {0618, 5057, 6129}
D6N Track-Type Tractor Hydraulic System Lift Cylinder (Ripper)
525C, 535C and 545C Wheel Skidders Power Train Transmission - Disassemble
525C, 535C and 545C Wheel Skidders Power Train Transmission - Assemble
D6N Track-Type Tractor Hydraulic System Piston Motor (Steering)
854K Wheel Dozer Transmission Oil Sample - Obtain
854K Wheel Dozer Cooling System Coolant Level - Check
C11 and C13 Engines for Caterpillar Built Machines Inlet Manifold - Install
C11 and C13 Engines for Caterpillar Built Machines Inlet Manifold - Remove
525C, 535C and 545C Wheel Skidders Machine Systems Grapple Boom (Dual Function) - Remove
525C, 535C and 545C Wheel Skidders Machine Systems Grapple Boom (Dual Function) - Install
525C, 535C and 545C Wheel Skidders Machine Systems Grapple Arch (Dual Function) - Remove
525C, 535C and 545C Wheel Skidders Machine Systems Grapple Arch (Dual Function) - Install