D10T Track-Type Tractor Machine Systems Caterpillar


Fast Fill Fuel Adapter

Usage:

D10T RJG



图 1g01272049

(1) 固定排气口组件的六根螺栓的扭矩 ... 13.0 ± 3.0 N·m (9.5 ± 2.0 lb ft)

(2) 两个接头的扭矩 ... 3.4 ± 1.0 N·m (2.5 ± 0.75 lb ft)

(3) 信号管上两个旋转螺母的扭矩 ... 25 ± 5 N·m (18.5 ± 3.7 lb ft)

Caterpillar Information System:

D7G Series 2 and D7G Series II Track-Type Tractors Safety Messages
D7G Series 2 and D7G Series II Track-Type Tractors Operator Controls
D6G Series 2 Track-Type Tractor Operator Controls
3508 EUI Engine for Off-Highway Truck/Tractors Muffler
525C, 535C and 545C Wheel Skidders Machine Systems Solenoid Valve and Manifold (Parking Brake Control) - Assemble
525C, 535C and 545C Wheel Skidders Machine Systems Solenoid Valve and Manifold (Parking Brake Control) - Disassemble
525C, 535C and 545C Wheel Skidders Machine Systems Solenoid Valve and Manifold (Parking Brake Control) - Install
525C, 535C and 545C Wheel Skidders Machine Systems Solenoid Valve and Manifold (Parking Brake Control) - Remove
Modes of Failure for Quick Disconnect Connectors {0618, 5057, 6129} Modes of Failure for Quick Disconnect Connectors {0618, 5057, 6129}
D6G Series 2 Track-Type Tractor Hydraulic System Bulldozer Tilt and Ripper Control Valves
525C, 535C and 545C Wheel Skidders Engine Supplement Air Cleaner - Remove and Install
G3408C and G3412C Engines Accumulator
854K Wheel Dozer Transmission Oil Filter - Replace
854K Wheel Dozer Transmission Oil Level - Check
D6N Track-Type Tractor Hydraulic System Angle Cylinder (Bulldozer)
D6N Track-Type Tractor Hydraulic System Lift Cylinder (Ripper)
525C, 535C and 545C Wheel Skidders Power Train Transmission - Disassemble
525C, 535C and 545C Wheel Skidders Power Train Transmission - Assemble
D6N Track-Type Tractor Hydraulic System Piston Motor (Steering)
854K Wheel Dozer Transmission Oil Sample - Obtain
854K Wheel Dozer Cooling System Coolant Level - Check
C11 and C13 Engines for Caterpillar Built Machines Inlet Manifold - Install
C11 and C13 Engines for Caterpillar Built Machines Inlet Manifold - Remove
525C, 535C and 545C Wheel Skidders Machine Systems Grapple Boom (Dual Function) - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.