525C, 535C and 545C Wheel Skidders Machine Systems Caterpillar

Assembly Procedure

Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.

Show/hide table

Illustration 1	g01271770

1. Install cartridge assembly (5) in manifold (1). Tighten cartridge assembly (5) to a torque of 50 ± 5 N·m (37 ± 4 lb ft).

2. Install coil assembly (6) and nut (7). Tighten nut (7) to a torque of 9.5 ± 1.5 N·m (84 ± 13 lb in).
   Show/hide table

   Illustration 2	g01271768

3. Install switch assembly (2).

4. Position bracket (4) on manifold (1) and install bolts (3).

End By:

1. Install the parking brake control manifold. Refer to Disassembly and Assembly, "Solenoid Valve and Manifold (Parking Brake Control) - Install".