525C, 535C and 545C Wheel Skidders Machine Systems Caterpillar


Solenoid Valve and Manifold (Parking Brake Control) - Install

Usage:

525C 525

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
FT-1114  Vacuum Cap 
5P-0306 Vacuum Transducer 
6V-4142 Fitting 
5K-5068 Fitting 

Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.



    Illustration 1g01271746


    Illustration 2g01271745

  1. Position manifold (1) and install bolts (6).

  2. Connect tube assemblies (3) and (5).

  3. Connect harness assemblies (2) and (4).

  4. Remove Tooling (A) from the hydraulic tank.

Caterpillar Information System:

525C, 535C and 545C Wheel Skidders Machine Systems Solenoid Valve and Manifold (Parking Brake Control) - Remove
Modes of Failure for Quick Disconnect Connectors {0618, 5057, 6129} Modes of Failure for Quick Disconnect Connectors {0618, 5057, 6129}
D6G Series 2 Track-Type Tractor Hydraulic System Bulldozer Tilt and Ripper Control Valves
525C, 535C and 545C Wheel Skidders Engine Supplement Air Cleaner - Remove and Install
G3408C and G3412C Engines Accumulator
D3K, D4K and D5K Track-Type Tractors Battery Disconnect Switch
525C, 535C and 545C Wheel Skidders Machine Systems Arch Cylinder - Remove and Install
525C, 535C and 545C Wheel Skidders Machine Systems Seat - Remove and Install
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Transmission Case
3508 EUI Engine for Off-Highway Truck/Tractors Cylinder Head Valves
D3K, D4K and D5K Track-Type Tractors Trunnion - Adjust
854K Wheel Dozer Oil Renewal System Oil Level - Check - If Equipped
525C, 535C and 545C Wheel Skidders Machine Systems Solenoid Valve and Manifold (Parking Brake Control) - Disassemble
525C, 535C and 545C Wheel Skidders Machine Systems Solenoid Valve and Manifold (Parking Brake Control) - Assemble
3508 EUI Engine for Off-Highway Truck/Tractors Muffler
D6G Series 2 Track-Type Tractor Operator Controls
D7G Series 2 and D7G Series II Track-Type Tractors Operator Controls
D7G Series 2 and D7G Series II Track-Type Tractors Safety Messages
D10T Track-Type Tractor Machine Systems Fast Fill Fuel Adapter
854K Wheel Dozer Transmission Oil Filter - Replace
854K Wheel Dozer Transmission Oil Level - Check
D6N Track-Type Tractor Hydraulic System Angle Cylinder (Bulldozer)
D6N Track-Type Tractor Hydraulic System Lift Cylinder (Ripper)
525C, 535C and 545C Wheel Skidders Power Train Transmission - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.