Fan Drive Bearing - Lubricate
Some of the fan drives have grease fittings and some of the fan drives do not have grease fittings. If there is no grease fitting, periodic lubrication is not required. The fan drive requires grease only if the fan drive is equipped with a zerk.
Show/hide table
| |
| Illustration 1 | g01221483 |
|
Typical location of the grease fitting (if equipped) that is for the fan drive bearing The pulley is shown with the belt guards that have been removed. | |
Lubricate the grease fitting that is on the fan drive bearing with Bearing Lubricant or the equivalent.
Inspect the fan drive pulley assembly for wear or for damage. If the shaft is loose, an inspection of the internal components should be performed. Refer to the Service Manual for additional information.
Caterpillar Information System:
TH31-E61 and TH35-E81 Petroleum Transmissions Capacities (Refill)
2006/01/30 New Oil Drain Tube for the Turbocharger {1052, 1307}
C27 and C32 Generator Set Engines Crankshaft Front Seal - Install
C3.3 and C4.4 Rental Generator Sets Before Towing
TH31-E61 and TH35-E81 Petroleum Transmissions Lifting and Tying Down the Transmission
C27 and C32 Generator Set Engines Crankshaft Front Seal - Remove
C175 Generator Set Engines Engine Oil Pan - Install
CX35 On-Highway Transmission Oil Filter (Transmission) - Replace
TH31-E61 and TH35-E81 Petroleum Transmissions Lubricant Viscosities
C32 Petroleum Generator Sets Generator Operation
C15-XQ400 Rental Generator Set Setup
C27 and C32 Generator Set Engines Vibration Damper and Pulley - Remove and Install
325D and 329D Excavators and 325D Material Handler Machine System Specifications Pilot Valve (Boom Drift Reduction)
C9 On-highway Engine Flywheel Housing
TH31 Well Servicing Transmissions Pump Drive - Disassemble
C6.6 Marine Generator Set Engine Will Not Crank
C6.6 Marine Generator Set Excessive Fuel Consumption
C4.4 Generator Set Engines Intermittent Engine Shutdown
C6.6 Generator Set Diagnostic Code Cross Reference
C6.6 Generator Set E361 High Engine Coolant Temperature
C6.6 Generator Set E539 High Intake Manifold Air Temperature
C27 and C32 Generator Set Engines Engine Support (Front) - Remove and Install
TH31-E61 and TH35-E81 Petroleum Transmissions Reference Material
2005/12/12 Remove Certain 6D-7726 Hose Assemblies from Inventory {0738}