Crankshaft Front Seal - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1U-7600 | 滑锤拉拔器 | 1 |
开始:
- 拆下曲轴减振器和皮带轮。 请参阅拆解和组装, "减振器和皮带轮 - 拆卸和安装"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 拆下螺栓 (1) 和适配器 (2) 。
Show/hide table
 | |
| 图 1 | g01221272 |
- 使用工具 (A) 或者冲头和锤子在曲轴前油封 (4) 上冲出不少于三个的孔。
Show/hide table
 | |
| 图 2 | g01221276 |
- 使用工具 (A) 拆下曲轴前密封 (4) 。
- 必要时，利用工具 (A) 或冲头以及手锤在曲轴耐磨套筒 (3) 内冲出三个或更多小孔。 使用工具 (A) 拆下曲轴耐磨套筒 (3) 。
Caterpillar Information System:
C175 Generator Set Engines Engine Oil Pan - Install
CX35 On-Highway Transmission Oil Filter (Transmission) - Replace
TH31-E61 and TH35-E81 Petroleum Transmissions Lubricant Viscosities
C32 Petroleum Generator Sets Generator Operation
C15-XQ400 Rental Generator Set Setup
C27 and C32 Generator Set Engines Vibration Damper and Pulley - Remove and Install
C175 Generator Set Engines Flywheel Housing - Install
330D and 336D Excavators Leaving the Machine
2005/12/12 New Flash File on C18 Marine Engines {7620}
C15 and C18 Industrial Engines Vibration Damper
C15-XQ400 Rental Generator Set Plate Locations and Film Locations
C27 and C32 Generator Set Engines Flywheel Housing - Remove and Install
TH31-E61 and TH35-E81 Petroleum Transmissions Lifting and Tying Down the Transmission
C3.3 and C4.4 Rental Generator Sets Before Towing
C27 and C32 Generator Set Engines Crankshaft Front Seal - Install
2006/01/30 New Oil Drain Tube for the Turbocharger {1052, 1307}
TH31-E61 and TH35-E81 Petroleum Transmissions Capacities (Refill)
C15-XQ400 Rental Generator Set Fan Drive Bearing - Lubricate
325D and 329D Excavators and 325D Material Handler Machine System Specifications Pilot Valve (Boom Drift Reduction)
C9 On-highway Engine Flywheel Housing
TH31 Well Servicing Transmissions Pump Drive - Disassemble
C6.6 Marine Generator Set Engine Will Not Crank
C6.6 Marine Generator Set Excessive Fuel Consumption
C4.4 Generator Set Engines Intermittent Engine Shutdown