Crankshaft Front Seal - Install
安装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
B     | 5P-1733     | 密封定位器     | 1     |
5P-1737 | 螺栓     | 3     | |
9S-8858 | 螺母 (密封件安装工具)     | 1     | |
6V-6142 | 密封件安装工具     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 清洁曲轴外径。
- 使用工具 (B) 将曲轴前密封 (4) 和曲轴耐磨套筒 (3) 作为一个整体进行安装。
注: 把曲轴前密封安装到发动机中,并使指示曲轴转动方向的箭头指向发动机前方。
Show/hide table
图 1 | g01221389 |
- 安装适配器 (2) 和螺栓 (1) 。
Show/hide table
图 2 | g01221272 |
End By: 安装曲轴减振器和皮带轮。 请参阅 拆解和组装, "减振器和皮带轮 - 拆卸和安装"。
Caterpillar Information System:
C3.3 and C4.4 Rental Generator Sets Before Towing
TH31-E61 and TH35-E81 Petroleum Transmissions Lifting and Tying Down the Transmission
C27 and C32 Generator Set Engines Crankshaft Front Seal - Remove
C175 Generator Set Engines Engine Oil Pan - Install
CX35 On-Highway Transmission Oil Filter (Transmission) - Replace
TH31-E61 and TH35-E81 Petroleum Transmissions Lubricant Viscosities
C32 Petroleum Generator Sets Generator Operation
C15-XQ400 Rental Generator Set Setup
C27 and C32 Generator Set Engines Vibration Damper and Pulley - Remove and Install
C175 Generator Set Engines Flywheel Housing - Install
330D and 336D Excavators Leaving the Machine
2005/12/12 New Flash File on C18 Marine Engines {7620}
2006/01/30 New Oil Drain Tube for the Turbocharger {1052, 1307}
TH31-E61 and TH35-E81 Petroleum Transmissions Capacities (Refill)
C15-XQ400 Rental Generator Set Fan Drive Bearing - Lubricate
325D and 329D Excavators and 325D Material Handler Machine System Specifications Pilot Valve (Boom Drift Reduction)
C9 On-highway Engine Flywheel Housing
TH31 Well Servicing Transmissions Pump Drive - Disassemble
C6.6 Marine Generator Set Engine Will Not Crank
C6.6 Marine Generator Set Excessive Fuel Consumption
C4.4 Generator Set Engines Intermittent Engine Shutdown
C6.6 Generator Set Diagnostic Code Cross Reference
C6.6 Generator Set E361 High Engine Coolant Temperature
C6.6 Generator Set E539 High Intake Manifold Air Temperature