C7 Industrial Engine Caterpillar


Plate Locations and Film Locations

Usage:

C7 JRA

Identifikasi Engine

Engine Caterpillar diidentifikasikan dengan nomor seri, nomor spesifikasi performa dan nomor susunan. Dalam beberapa kasus, nomor modifikasi juga digunakan. Nomor-nomor ini diperlihatkan pada Pelat Nomor Seri dan Pelat Informasi yang terpasang pada engine.

Dealer Caterpillar memerlukan nomor-nomor ini untuk menentukan komponen-komponen yang terdapat di dalam engine. Ini akan memungkinkan dilakukannya identifikasi yang akurat terhadap nomor suku cadang pengganti.

Pelat Nomor Seri




Ilustrasi 1g00764267

Pelat Nomor Seri terletak disamping kanan cylinder block.

Informasi berikut tercetak pada Pelat Nomor Seri: nomor seri engine, model engine dan nomor susunan (arrangement).

Pelat Informasi




Ilustrasi 2g00764335

Contoh

Pelat Informasi ini terdapat di penutup katub depan. Informasi berikut ada pada Pelat Informasi: nomor seri engine, model engine, nomor susunan engine, ketinggian maksimum engine yang memungkinkan untuk mencapai daya rata-rata yang diizinkan, horsepower, kecepatan idle tinggi, rpm beban penuh, seting bahan bakar dan dan informasi lainnya.

Sertifikasi Emisi




Ilustrasi 3g00284658

Stiker untuk EPA Emission Certification




Ilustrasi 4g00415538

Stiker untuk European Emission Certification

Stiker untuk Sertifikasi Emisi EPA (jika dilengkapi) dan/atau stiker untuk Sertifikasi Emisi Eropa (jika dilengkapi) terletak disamping engine.

Caterpillar Information System:

C27 and C32 Generator Set Engines Emergency Stop Switch Circuit - Test
C27 and C32 Engines Engine Oil Pressure - Test
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Check Valve (Counterweight Circuit) - Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Fuel Filter Pressure Differential Switch
3500C Marine Engines Engine Design
C32 Petroleum Engines Camshaft - Remove
C175-16 Locomotive Engine Inlet and Exhaust Valve Seat Inserts - Remove and Install
C7 Industrial Engine Sensors and Electrical Components
C27 and C32 Generator Set Engines Ether Injection System - Test
C32 Petroleum Engines Cylinder Head - Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
C27 and C32 Engines Cooling System
2005/10/17 Power Relay Used for Isolation on VR6 Voltage Regulators {4467, 4493}
2005/11/07 Heavy Duty Ring Terminals Are Now Being Used on High Voltage Generators {7553}
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines 5 Volt Sensor Supply Circuit - Test
C7 Industrial Engine Refill Capacities and Recommendations
C7 Industrial Engine Diagnostic Flash Code Retrieval
C7 Industrial Engine Reference Material
C7.1 Engines for Caterpillar Built Machines Water Temperature Regulator - Test
C7.1 Engines for Caterpillar Built Machines Cooling System - Test
C6.6 Engines for Caterpillar Built Machines Increased Engine Oil Temperature - Inspect
C3.4B Engines for Caterpillar Built Machines Excessive Engine Oil Consumption - Inspect
2005/10/03 Responsibilities for Emission Certified Engines {1000}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.