Check Valve (Counterweight Circuit) - Install
安装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | FT-2674 | 真空舱 | 1 |
- 安装 O 形密封圈 (2) 。 安装支承环 (3) 。
Show/hide table
 | |
| 图 1 | g01206421 |
- 安装单向阀 (1) 。
Show/hide table
 | |
| 图 2 | g01206419 |
- 从液压油箱上卸下工具 (A) 。
Show/hide table
 | |
| 图 3 | g01204278 |
Caterpillar Information System:
C175-16 and C175-20 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Fuel Filter Pressure Differential Switch
3500C Marine Engines Engine Design
C32 Petroleum Engines Camshaft - Remove
C175-16 Locomotive Engine Inlet and Exhaust Valve Seat Inserts - Remove and Install
C7 Industrial Engine Sensors and Electrical Components
C27 and C32 Generator Set Engines Ether Injection System - Test
C32 Petroleum Engines Cylinder Head - Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
C7 Industrial Engine Engine Description
C32 Petroleum Generator Sets Reference Material
C7.1 Engines for Caterpillar Built Machines Water Temperature Regulator and Housing
C27 and C32 Engines Engine Oil Pressure - Test
C27 and C32 Generator Set Engines Emergency Stop Switch Circuit - Test
C7 Industrial Engine Plate Locations and Film Locations
C27 and C32 Engines Cooling System
2005/10/17 Power Relay Used for Isolation on VR6 Voltage Regulators {4467, 4493}
2005/11/07 Heavy Duty Ring Terminals Are Now Being Used on High Voltage Generators {7553}
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines 5 Volt Sensor Supply Circuit - Test
C7 Industrial Engine Refill Capacities and Recommendations
C7 Industrial Engine Diagnostic Flash Code Retrieval
C7 Industrial Engine Reference Material
C7.1 Engines for Caterpillar Built Machines Water Temperature Regulator - Test
C7.1 Engines for Caterpillar Built Machines Cooling System - Test