An Improved Idler Pulley Has Been Released {1358}
- Truck Engine:
- C-10 (S/N: 3CS1-UP)
- C-12 (S/N: 2KS1-UP)
- C-15 (S/N: 6NZ1-UP)
- C-16 (S/N: 7CZ1-UP)
- C-18 (S/N: MDP1-UP)
- C9 (S/N: 9DG1-UP)
An improved idler pulley is now available. The idler pulley has the following improvements:
- Bearings have improved seal design for resistance to contamination.
- Improved grease for longer life
- Higher quality of grease is used for lubrication.
The improved idler pulley is part of the 190-0649 Tightener.
Caterpillar Information System:
C7.1 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
C27 and C32 Engines for Caterpillar Built Machines CID 0174 FMI 03 Fuel Temperature open/short to +batt
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Install - Rear
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0826 - FMI 04
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Selector Valve (Alternate Pattern Control) - Assemble
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Selector Valve (Alternate Pattern Control) - Disassemble
3412E Petroleum Engine Front Cover - Install
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Throttle Switch Circuit - Test
C4.4 and C6.6 Engines for Caterpillar Built Machines ECM Memory - Test
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Remove - Rear
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Install - Front
3412E Petroleum Engine Front Cover - Remove
3412E Petroleum Engine Crankcase Breather - Remove and Install
2005/08/15 An Improved Idler Pulley Has Been Released {1358}
Caterpillar On-Highway Diesel Engine Fluids Recommendations Characteristics of Diesel Fuel
TH48-E80 Petroleum Transmission Power Train Electronic Control System Electrical Component and Connector Locations
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Fuel Rail Pump Solenoid - Test
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
TH48-E80 Petroleum Transmission Power Train Electronic Control System Diagnostic Capabilities
TH48-E80 Petroleum Transmission Power Train Electronic Control System Diagnostic Code List
3126B Generator Set Engine Engine Pressure Sensor Open or Short Circuit - Test
770 and 772 Off-Highway Truck Chassis Electronic Control System Starting System
TH48-E80 Petroleum Transmission Power Train Electronic Control System Position Sensor (Transmission Gear) - Check
3412E Petroleum Engine Engine Oil Pan - Remove and Install