Front Cover - Remove
Removal Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (1) and engine lifting bracket (2) .
Show/hide table
Illustration 1 | g01193105 |
- Remove bolts (3) .
Show/hide table
Illustration 2 | g01193110 |
- Remove the nut from stud (6) .
- Remove nut (4) .
- Remove front cover (5) and the gasket.
Caterpillar Information System:
2005/08/22 Improved Gasket for the Jacket Water Pump {1361}
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0826 - FMI 03
2005/08/15 New Torque Procedure for the Exhaust Elbow {1061}
3412E Petroleum Engine Vibration Damper and Pulley - Remove and Install
2005/08/15 Improved Ignition Transformers are Used {4476}
3412E Petroleum Engine Flywheel Housing - Remove and Install
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0672 - FMI 08
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0672 - FMI 02
3412E Petroleum Engine Flywheel - Install
3412E Petroleum Engine Flywheel - Remove
C-12 Generator Set Engine Electrical Power Supply Circuit - Test
C9 Urban Transit Bus Engine Refill Capacities and Recommendations
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Install - Front
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Remove - Rear
C4.4 and C6.6 Engines for Caterpillar Built Machines ECM Memory - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Throttle Switch Circuit - Test
3412E Petroleum Engine Front Cover - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Selector Valve (Alternate Pattern Control) - Disassemble
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Selector Valve (Alternate Pattern Control) - Assemble
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0826 - FMI 04
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Install - Rear
C27 and C32 Engines for Caterpillar Built Machines CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7.1 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
2005/08/01 An Improved Idler Pulley Has Been Released {1358}