Engine Mount - Install - Rear
安装步骤
- 将适当的起吊设备连接到发动机 (7) 。 发动机和泵 (7) 的重量约为 1089 kg (2400 lb)。 给发动机和泵施加一个轻微的起吊压力。
Show/hide table
 | |
| 图 1 | g01193421 |
- 安装垫圈 (12) 和橡胶安装件 (13) 。 安装支架 (9) 。 安装螺栓 (8) 、 (10) 和 (11) 。 安装螺母 (14) 。 将螺栓 (8) 上紧到 900 ± 100 N·m (664 ± 74 lb ft) 的扭矩。
Show/hide table
 | |
| 图 2 | g01193424 |
Show/hide table
 | |
| 图 3 | g01195154 |
- 对于另一侧，重复步骤2。
- 安装护罩 (6) 。
Show/hide table
 | |
| 图 4 | g01193419 |
- 连接支架 (5) 。 安装螺栓 (4) 。
Show/hide table
 | |
| 图 5 | g01193416 |
- 将盖 (3) 作为一个整体，进行安装。
Show/hide table
 | |
| 图 6 | g01193415 |
- 安装支架 (2) 。
Show/hide table
 | |
| 图 7 | g01193411 |
- 安装支架 (1) 。
Show/hide table
 | |
| 图 8 | g01193380 |
End By: 安装消音器。 请参阅 拆解和组装, "消音器 - 安装"。
Caterpillar Information System:
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0826 - FMI 04
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Selector Valve (Alternate Pattern Control) - Assemble
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Selector Valve (Alternate Pattern Control) - Disassemble
3412E Petroleum Engine Front Cover - Install
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Throttle Switch Circuit - Test
C4.4 and C6.6 Engines for Caterpillar Built Machines ECM Memory - Test
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Remove - Rear
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Install - Front
3412E Petroleum Engine Front Cover - Remove
2005/08/22 Improved Gasket for the Jacket Water Pump {1361}
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0826 - FMI 03
2005/08/15 New Torque Procedure for the Exhaust Elbow {1061}
C27 and C32 Engines for Caterpillar Built Machines CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7.1 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
2005/08/01 An Improved Idler Pulley Has Been Released {1358}
3412E Petroleum Engine Crankcase Breather - Remove and Install
2005/08/15 An Improved Idler Pulley Has Been Released {1358}
Caterpillar On-Highway Diesel Engine Fluids Recommendations Characteristics of Diesel Fuel
TH48-E80 Petroleum Transmission Power Train Electronic Control System Electrical Component and Connector Locations
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Fuel Rail Pump Solenoid - Test
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
TH48-E80 Petroleum Transmission Power Train Electronic Control System Diagnostic Capabilities
TH48-E80 Petroleum Transmission Power Train Electronic Control System Diagnostic Code List
3126B Generator Set Engine Engine Pressure Sensor Open or Short Circuit - Test