Engine Mount - Remove - Rear
拆卸步骤
开始:
- 拆下消音器。 请参阅拆解和组装, "消音器 - 拆卸"。
- 拆下支撑 (1) 。
Show/hide table
 | |
| 图 1 | g01193380 |
- 卸下托架 (2) 。
Show/hide table
 | |
| 图 2 | g01193411 |
- 将盖 (3) 作为一个整体进行拆卸。
Show/hide table
 | |
| 图 3 | g01193415 |
- 拆下螺栓 (4) 以断开支架 (5) 。
Show/hide table
 | |
| 图 4 | g01193416 |
- 拆下护罩 (6) 。
Show/hide table
 | |
| 图 5 | g01193419 |
- 将适当的起吊设备连接到发动机 (7) 。 发动机和泵 (7) 的重量约为 1089 kg (2400 lb)。 给发动机和泵施加一个轻微的起吊压力。
Show/hide table
 | |
| 图 6 | g01193421 |
- 拆下螺栓 (8) 、 (10) 和 (11) 。 拆下螺母 (14) 。 卸下支架 (9) 。 取下垫圈 (12) 和橡胶底座 (13) 。
Show/hide table
 | |
| 图 7 | g01193424 |
Show/hide table
 | |
| 图 8 | g01195154 |
- 对于另一侧，重复步骤7。
Caterpillar Information System:
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Install - Front
3412E Petroleum Engine Front Cover - Remove
2005/08/22 Improved Gasket for the Jacket Water Pump {1361}
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0826 - FMI 03
2005/08/15 New Torque Procedure for the Exhaust Elbow {1061}
3412E Petroleum Engine Vibration Damper and Pulley - Remove and Install
2005/08/15 Improved Ignition Transformers are Used {4476}
3412E Petroleum Engine Flywheel Housing - Remove and Install
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0672 - FMI 08
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0672 - FMI 02
3412E Petroleum Engine Flywheel - Install
3412E Petroleum Engine Flywheel - Remove
C4.4 and C6.6 Engines for Caterpillar Built Machines ECM Memory - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Throttle Switch Circuit - Test
3412E Petroleum Engine Front Cover - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Selector Valve (Alternate Pattern Control) - Disassemble
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Selector Valve (Alternate Pattern Control) - Assemble
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0826 - FMI 04
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Install - Rear
C27 and C32 Engines for Caterpillar Built Machines CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7.1 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
2005/08/01 An Improved Idler Pulley Has Been Released {1358}
3412E Petroleum Engine Crankcase Breather - Remove and Install
2005/08/15 An Improved Idler Pulley Has Been Released {1358}