Improved Gasket for the Jacket Water Pump {1361}
- Generator Set:
- G3516C (S/N: GZZ1-UP)
- G3520C (S/N: B9P1-UP; CWY1-UP; MAD1-UP; GZJ1-UP; GZK1-UP; GZM1-UP; GZN1-UP; HAT1-UP; CWW1-UP)
Description of Change: A new gasket is now available for the jacket water pump's outlet. The gasket has a silicone bead on the inside diameter in order to improve sealing.
Adaptable To: The 273-3967 Gasket is now available. The new gasket replaces the 136-3246 Gasket. The gaskets are for the 235-4535 Water Pump Gp and 235-4536 Water Pump Gp.
Show/hide table
Illustration 1 | g01193154 |
(1) Gasket (2) 252-5810 Bracket (3) 252-5811 Bracket |
Brackets (2) and (3) may also be used to provide additional support for the water lines group. This will minimize the stress on the outlet of the pump.
Show/hide table
Part Numbers     | ||
Old Part Number     | New Part Number     | Description     |
136-3246     | 273-3967     | Gasket     |
    | 252-5810     | Bracket     |
    | 252-5811     | Bracket     |
Show/hide table
Effective Serial Numbers     | |
S/N:B9P00215     | |
S/N:CWW00302     | |
S/N:CWY00222     | |
S/N:GZJ00192     | |
S/N:GZK00160     | |
S/N:GZM00138     | |
S/N:GZN00228     | |
S/N:GZZ00155     | |
S/N:HAT00212     | |
S/N:MAD00202     |
Caterpillar Information System:
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0826 - FMI 03
2005/08/15 New Torque Procedure for the Exhaust Elbow {1061}
3412E Petroleum Engine Vibration Damper and Pulley - Remove and Install
2005/08/15 Improved Ignition Transformers are Used {4476}
3412E Petroleum Engine Flywheel Housing - Remove and Install
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0672 - FMI 08
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0672 - FMI 02
3412E Petroleum Engine Flywheel - Install
3412E Petroleum Engine Flywheel - Remove
C-12 Generator Set Engine Electrical Power Supply Circuit - Test
C9 Urban Transit Bus Engine Refill Capacities and Recommendations
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0590 - FMI 02
3412E Petroleum Engine Front Cover - Remove
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Install - Front
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Remove - Rear
C4.4 and C6.6 Engines for Caterpillar Built Machines ECM Memory - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Throttle Switch Circuit - Test
3412E Petroleum Engine Front Cover - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Selector Valve (Alternate Pattern Control) - Disassemble
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Selector Valve (Alternate Pattern Control) - Assemble
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0826 - FMI 04
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Install - Rear
C27 and C32 Engines for Caterpillar Built Machines CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7.1 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust