Selector Valve (Alternate Pattern Control) - Assemble
- 安装螺塞 (12)。
Show/hide table
图 2 g01193322 - 将油缸 (9)、操纵杆 (10) 和螺母 (11) 安装在盖 (5) 上。
Show/hide table
图 3 g01193321 - 将 O 形密封圈 (7) 安装在壳体 (8)上。
Show/hide table
图 4 g01193320 - 安装面板 (5)、螺栓 (4) 和螺栓 (6)。
Show/hide table
图 5 g01193319 - 安装 O 型密封圈 (3)。
Show/hide table
图 6 g01193318 - 安装盖 (2) 和螺栓 (1)。
Show/hide table
图 1 | g01193323 |
结束:
- 安装选档器阀。 请参阅拆解和组装, "选档器阀(交替模式控制)- 安装"。
Caterpillar Information System:
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Selector Valve (Alternate Pattern Control) - Disassemble
3412E Petroleum Engine Front Cover - Install
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Throttle Switch Circuit - Test
C4.4 and C6.6 Engines for Caterpillar Built Machines ECM Memory - Test
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Remove - Rear
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Install - Front
3412E Petroleum Engine Front Cover - Remove
2005/08/22 Improved Gasket for the Jacket Water Pump {1361}
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0826 - FMI 03
2005/08/15 New Torque Procedure for the Exhaust Elbow {1061}
3412E Petroleum Engine Vibration Damper and Pulley - Remove and Install
2005/08/15 Improved Ignition Transformers are Used {4476}
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0826 - FMI 04
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Engine Mount - Install - Rear
C27 and C32 Engines for Caterpillar Built Machines CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7.1 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
2005/08/01 An Improved Idler Pulley Has Been Released {1358}
3412E Petroleum Engine Crankcase Breather - Remove and Install
2005/08/15 An Improved Idler Pulley Has Been Released {1358}
Caterpillar On-Highway Diesel Engine Fluids Recommendations Characteristics of Diesel Fuel
TH48-E80 Petroleum Transmission Power Train Electronic Control System Electrical Component and Connector Locations
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Fuel Rail Pump Solenoid - Test
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
TH48-E80 Petroleum Transmission Power Train Electronic Control System Diagnostic Capabilities