TH48-E80 Petroleum Transmission Power Train Electronic Control System Caterpillar


Position Sensor (Transmission Gear) - Check

Usage:

TH48-E80 FRT

  • Observe the status screen on the ET for the gear indicator. The readout displays the signals from the transmission gear switch.

    n - Neutral

    1 - First gear

    2 - Second gear

    3 - Third gear

    4 - Fourth gear

    5 - Fifth gear

    6 - Sixth gear

    7 - Seventh gear

    8 - Eighth gear

  • Operate the machine and shift the transmission to each gear. Observe the display. Check that the display matches each gear of the transmission.

    • The display matches the gear. The gear indicator switch is operating correctly.

    • The display does NOT match. There is a defect. The ECM should have detected a diagnostic code of CID 0700.
  • Caterpillar Information System:

    770 and 772 Off-Highway Truck Chassis Electronic Control System Starting System
    3126B Generator Set Engine Engine Pressure Sensor Open or Short Circuit - Test
    TH48-E80 Petroleum Transmission Power Train Electronic Control System Diagnostic Code List
    TH48-E80 Petroleum Transmission Power Train Electronic Control System Diagnostic Capabilities
    C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
    C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Fuel Rail Pump Solenoid - Test
    TH48-E80 Petroleum Transmission Power Train Electronic Control System Electrical Component and Connector Locations
    Caterpillar On-Highway Diesel Engine Fluids Recommendations Characteristics of Diesel Fuel
    2005/08/15 An Improved Idler Pulley Has Been Released {1358}
    3412E Petroleum Engine Crankcase Breather - Remove and Install
    2005/08/01 An Improved Idler Pulley Has Been Released {1358}
    C7.1 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
    3412E Petroleum Engine Engine Oil Pan - Remove and Install
    3126B Generator Set Engine Engine Temperature Sensor Open or Short Circuit - Test
    3412E Petroleum Engine Cylinder Liner - Install
    3608 Engine Crankshaft Position for Fuel Timing and Valve Lash Adjustment
    3406C Engines for Caterpillar Built Machines Engine Oil Pump
    3412E Petroleum Engine Piston Cooling Jets - Remove and Install
    C280 Marine Engines Metal Particle Detector
    C280 Marine Engines Metal Particle Detector - Test
    C9-XQ300 Rental Generator Set Wiring Diagrams
    3412E Petroleum Engine Pistons and Connecting Rods - Disassemble
    3512C SR4B Generator Sets Product Description
    C280 Marine Engines Internal Lubrication
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.