Piston Cooling Jets - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 9S-9082     | Engine Turning Tool     | 1     |
Start By:
- Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) to rotate the crankshaft in order to gain access to each of the piston cooling jets. Remove bolt (1). Remove piston cooling jet (2) from the engine.
Show/hide table
Illustration 1 | g00566226 |
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 9S-9082     | Engine Turning Tool     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) to rotate the crankshaft in order to gain access to each of the piston cooling jets. Position piston cooling jet (2) on the engine. Tighten bolt (1) to the standard torque.
Show/hide table
Illustration 2 | g00566226 |
End By: Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Caterpillar Information System:
3406C Engines for Caterpillar Built Machines Engine Oil Pump
3608 Engine Crankshaft Position for Fuel Timing and Valve Lash Adjustment
3412E Petroleum Engine Cylinder Liner - Install
3126B Generator Set Engine Engine Temperature Sensor Open or Short Circuit - Test
3412E Petroleum Engine Engine Oil Pan - Remove and Install
TH48-E80 Petroleum Transmission Power Train Electronic Control System Position Sensor (Transmission Gear) - Check
770 and 772 Off-Highway Truck Chassis Electronic Control System Starting System
3126B Generator Set Engine Engine Pressure Sensor Open or Short Circuit - Test
TH48-E80 Petroleum Transmission Power Train Electronic Control System Diagnostic Code List
TH48-E80 Petroleum Transmission Power Train Electronic Control System Diagnostic Capabilities
C13, C15, and C18 Tier 4 Final Engines Electric Starting Motor
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Fuel Rail Pump Solenoid - Test
C280 Marine Engines Metal Particle Detector
C280 Marine Engines Metal Particle Detector - Test
C9-XQ300 Rental Generator Set Wiring Diagrams
3412E Petroleum Engine Pistons and Connecting Rods - Disassemble
3512C SR4B Generator Sets Product Description
C280 Marine Engines Internal Lubrication
2005/11/21 A New Connecting Rod is Used in 3500B and 3500C High Displacement Machine Engines {1218}
3412E Petroleum Engine Pistons and Connecting Rods - Assemble
3500 Generator Sets Product Lifting
C280 Marine Engines Internal Lubrication
3512C SR4B Generator Sets Refill Capacities and Recommendations
C280 Marine Engines Cooling System Operation