Magnetic Pickups - Clean/Inspect - If Equipped
Show/hide table
插圖 1 | g00614378 |
- 取下飛輪外殼的磁式拾音器。 檢查磁性拾取器末端的狀況。 檢查是否有磨損和汙染的跡象。
- 清除磁鐵表面的金屬屑和其他碎片。
- 裝回磁式拾音器,直到磁鐵接觸到飛輪環齒輪上的齒端為止。
- 旋轉 180 度以鬆開磁式拾音器。 將鎖緊螺帽鎖緊至
45 ± 7 N·m (33 ± 5 lb ft) 的扭矩。
Caterpillar Information System:
3406E Marine Engine Pistons and Connecting Rods - Assemble
C4.4 Industrial Engine Engine Starting
C4.4 Industrial Engine Burn Prevention
C4.4 Industrial Engine General Hazard Information
3406E Marine Engine Pistons and Connecting Rods - Disassemble
C9 Engine for Caterpillar Built Machines Engine Oil Filter Base and Oil Cooler - Remove
793F Off-Highway Truck Differential Warm-up and Break-in
3500 Generator Sets Reference Material
C9 Engine for Caterpillar Built Machines Air Inlet Heater - Install
C4.4 Industrial Engine Monitoring System
C4.4 Industrial Engine Gauges and Indicators
2014/08/07 A New Fuel Transfer Pump Has Been Released {1256}
C6.6 Industrial Engine Diagnostic Flash Code Retrieval
C4.4 Industrial Engine Before Starting Engine
C4.4 (Mech) Industrial Engine Starting with Jump Start Cables
3500 Industrial and Generator Set Engines Overhaul Considerations
C7 On-highway Engine Cylinder Block Cover Group
3044C Industrial Engine Cold Weather Operation
C27 and C32 Industrial and Petroleum Engines E2143 Low Engine Coolant Level
2005/05/01 New Hold Down Bracket Assembly for the Turbocharger Oil Line {1052, 1307}
C9 Engine for Caterpillar Built Machines Engine Oil Filter Base and Oil Cooler - Install
3406E Marine Engine Fuel Temperature Sensor - Remove and Install
3406E and C15 Marine Engines Inlet Air Temperature Sensor - Remove and Install
325D and 329D Excavators Hydraulic System Swivel