Fuel Temperature Sensor - Remove and Install
拆卸步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 断开线束组件 (1) 。
Show/hide table
 | |
| 图 1 | g01171721 |
- 从燃油歧管上拆下燃油温度传感器 (2) 。
- 将 O 形密封圈从燃油温度传感器 (2) 上拆下。
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将一个新的 O 形密封圈安装在燃油温度传感器 (2) 上。
Show/hide table
| | |
| 图 2 | g01171721 |
- 安装燃油温度传感器 (2) 。 将燃油温度传感器拧紧到 20 ± 5 N·m (15 ± 4 lb ft) 的扭矩。
- 连接线束组件 (1) 。
Caterpillar Information System:
C9 Engine for Caterpillar Built Machines Engine Oil Filter Base and Oil Cooler - Install
2005/05/01 New Hold Down Bracket Assembly for the Turbocharger Oil Line {1052, 1307}
C27 and C32 Industrial and Petroleum Engines E2143 Low Engine Coolant Level
3044C Industrial Engine Cold Weather Operation
C7 On-highway Engine Cylinder Block Cover Group
3500 Industrial and Generator Set Engines Overhaul Considerations
C4.4 (Mech) Industrial Engine Starting with Jump Start Cables
C4.4 Industrial Engine Before Starting Engine
C6.6 Industrial Engine Diagnostic Flash Code Retrieval
3500 Industrial and Generator Set Engines Magnetic Pickups - Clean/Inspect - If Equipped
3406E Marine Engine Pistons and Connecting Rods - Assemble
C4.4 Industrial Engine Engine Starting
3406E and C15 Marine Engines Inlet Air Temperature Sensor - Remove and Install
325D and 329D Excavators Hydraulic System Swivel
3406E and C15 Marine Engines Turbocharger Outlet Pressure Sensor - Remove and Install
3406E Marine Engine Camshaft Position Sensor - Remove and Install
C4.4 Industrial Engine Battery Electrolyte Level - Check
C4.4 Industrial Engine Engine - Clean
3406E Marine Engine Fuel Pressure Sensor - Remove and Install
3406E and C15 Marine Engines Crankshaft Position Sensor - Remove and Install
3406E and C15 Marine Engines Engine Oil Pressure Sensor - Remove and Install
C32 Petroleum Engines Plate Locations and Film Locations
3406E Marine Engine Coolant Temperature Sensor - Remove and Install
2005/05/30 New Strainer for the Air Starting Motor {1451}