New Strainer for the Air Starting Motor {1451}
- Engine:
- 3600 Diesel
- G3600
A new strainer has been introduced for 3600 Engines in order to increase the life of vane type air starting motors. The new strainer will filter more particulates.
This will provide cleaner starting air which will extend the life of rotating components within the starting motor. In addition to the new strainer, ensure that the air system has proper lubrication and that the air system is free of moisture. This will greatly extend the life of air starting motors.
The 229-5867 Air Lines Strainer Gp is replaced by the 146-5215 Air Lines Strainer Gp.
Caterpillar Information System:
3406E Marine Engine Coolant Temperature Sensor - Remove and Install
C32 Petroleum Engines Plate Locations and Film Locations
3406E and C15 Marine Engines Engine Oil Pressure Sensor - Remove and Install
3406E and C15 Marine Engines Crankshaft Position Sensor - Remove and Install
3406E Marine Engine Fuel Pressure Sensor - Remove and Install
C4.4 Industrial Engine Engine - Clean
C4.4 Industrial Engine Battery Electrolyte Level - Check
3406E Marine Engine Camshaft Position Sensor - Remove and Install
3406E and C15 Marine Engines Turbocharger Outlet Pressure Sensor - Remove and Install
325D and 329D Excavators Hydraulic System Swivel
3406E and C15 Marine Engines Inlet Air Temperature Sensor - Remove and Install
3406E Marine Engine Fuel Temperature Sensor - Remove and Install
3406E and C15 Marine Engines Coolant Level Sensor - Remove and Install
2005/06/06 New Inlet Manifold Pressure Sensors are Available {1058, 1923}
2005/06/06 Prevent Spontaneous Engine Shutdown {1000}
C13 and C15 On-highway Engines Sensor Signal (PWM) - Test
C27 and C32 Industrial and Petroleum Engines System Configuration Parameters
C9 Marine Auxiliary and Marine Generator Set Engines Coolant Temperature Is Too High
C18 Marine Generator Set Engines Sensors and Electrical Connectors
C9 Engine for Caterpillar Built Machines Engine Oil Pump - Remove
C13 and C15 On-highway Engines Air Shutoff - Test
3500 and 3500B Engines Heat Exchanger - Inspect - if equipped
3500 Industrial and Generator Set Engines Auxiliary Water Pump - Inspect - if equipped
C9.3 Engines for Caterpillar Built Machines Lubrication System