Transmission and Transfer Gears - Separate
Separation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 138-7574 | Link Bracket | 1 |
| B | 1/2 inch by 3 inch Forcing Bolt | 2 | |
Start By:
- Remove the transmission, the torque converter, the transfer gears and the differential. Refer to Disassembly and Assembly, "Transmission, Torque Converter, Transfer Gears and Differential - Remove".
- Support the transmission with the cribbing and wedges (1), as shown.
Show/hide table
 | |
| Illustration 1 | g00517771 |
- Disconnect clip (2) .
Show/hide table
 | |
| Illustration 2 | g00829393 |
- Install Tool (A) and a suitable lifting device.
Show/hide table
 | |
| Illustration 3 | g00829424 |
- Remove the nuts and bolts (4) that hold transfer gear case (3) to transmission (6). Install Tooling (B) to threaded holes (5). Use Tooling (B) to separate transfer gear case (3) from transmission (6) .
Show/hide table
 | |
| Illustration 4 | g00829387 |
- Remove transfer gear case (3) from transmission (6). Transfer gear case (3) weighs 340 kg (750 lb).
Show/hide table
 | |
| Illustration 5 | g00829418 |
- Remove O-ring seal (7) from transfer gear case (3). Remove five O-ring seals (8) from transmission (6) .
Caterpillar Information System:
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Sensors and Electrical Connectors
2001/10/15 Correction to Specification , "Track Rollers" {4180}
631G Wheel Tractor Power Train Transmission, Torque Converter, Transfer Gears and Differential - Install
D3G, D4G and D5G Hystat Track-Type Tractors Power Train Final Drive and Sprocket - Install
D5N Track-Type Tractor Transmission Oil Filter
627G Wheel Scraper Power Train Differential and Bevel Gear - Disassemble
2001/10/15 Correction to Disassembly and Assembly , "Track Roller - Install" {4180}
2001/10/15 Update to the Testing and Adjusting Module , "Line Relief Valve Test and Adjust" {5051}
D10R Track-Type Tractor Engine Supplement Hydraulic Fan Clutch - Install
D10R Track-Type Tractor Engine Supplement Hydraulic Fan Clutch - Remove
623G Wheel Tractor-Scraper Machine Systems Check Valve (Carry) - Install
2001/10/15 Correction to Disassembly and Assembly , "Track Roller - Install" {4180, 4180}
D3G, D4G and D5G Track-Type Tractors Parking Brake
D6N Track-Type Tractor Power Train Priority Valve
631G Wheel Tractor Power Train Transmission and Transfer Gears - Connect
D3G, D4G and D5G Hystat Track-Type Tractors Power Train Final Drive and Sprocket - Disassemble
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Digital Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
D10R Track-Type Tractor Power Train Chrome Bearing - Remove and Install
2001/10/29 Correction to Disassembly and Assembly , "Bucket-Install" {0645, 6101, 6102}
623G Wheel Tractor-Scraper Machine Systems Check Valve (Carry) - Disassemble
966H and 972H Wheel Loaders Machine Systems Electrohydraulic Control - Remove
621G and 623G Wheel Tractor Power Train Final Drive - Disassemble
3056 Engines Engine Oil Pump