Sensors and Electrical Connectors
Show/hide table
Connector     | Function     | |
J1/P1     | ECM Connector (Machine)     | |
J2/P2     | ECM Connector (Engine)     | |
J62     | Service Tool Connector     | |
J100/P100     | Engine Coolant Temperature Sensor     | |
J103/P103     | Intake Manifold Air Temperature Sensor     | |
J105/P105     | Fuel Temperature Sensor     | |
J137/P137     | Hydraulic Oil Temperature Sensor     | |
J200/P200     | Turbocharger Outlet Pressure Sensor     | |
J201/P201     | Engine Oil Pressure Sensor     | |
J203/P203     | Atmospheric Pressure Sensor     | |
J205/P205     | Turbocharger Inlet Pressure Sensor     | |
J209/P209     | Fuel Pressure Sensor     | |
J300/P300     | Injector Solenoid Harness     | |
J301/P301 to J306/P306     |
Injector Solenoids     | |
J400/P400     | Timing Calibration (TC) Probe Connector     | |
J401/P401     | Primary Engine Speed/Timing Sensor     | |
J402/P402     | Secondary Engine Speed/Timing Sensor     | |
J403/P403     | Throttle Position Sensor     | |
J508/P508     | Hydraulic Demand Fan Solenoid     | |
J700/P700     | Ground Level Shutdown Switch     |
Show/hide table
Illustration 1 | g00693506 |
ECM and harness connectors |
Show/hide table
Illustration 2 | g01006779 |
Block diagram |
Show/hide table
Illustration 3 | g01006781 |
Component locations ( 3176C and 3196) |
Show/hide table
Illustration 4 | g01006782 |
Component locations ( 3406E) |
Caterpillar Information System:
2001/10/15 Correction to Specification , "Track Rollers" {4180}
631G Wheel Tractor Power Train Transmission, Torque Converter, Transfer Gears and Differential - Install
D3G, D4G and D5G Hystat Track-Type Tractors Power Train Final Drive and Sprocket - Install
D5N Track-Type Tractor Transmission Oil Filter
627G Wheel Scraper Power Train Differential and Bevel Gear - Disassemble
2001/10/15 Correction to Disassembly and Assembly , "Track Roller - Install" {4180}
2001/10/15 Update to the Testing and Adjusting Module , "Line Relief Valve Test and Adjust" {5051}
D10R Track-Type Tractor Engine Supplement Hydraulic Fan Clutch - Install
D10R Track-Type Tractor Engine Supplement Hydraulic Fan Clutch - Remove
623G Wheel Tractor-Scraper Machine Systems Check Valve (Carry) - Install
2001/10/15 Correction to Disassembly and Assembly , "Track Roller - Install" {4180, 4180}
2001/10/15 Correction to Specification , "Track Rollers" {4180}
631G Wheel Tractor Power Train Transmission and Transfer Gears - Separate
D3G, D4G and D5G Track-Type Tractors Parking Brake
D6N Track-Type Tractor Power Train Priority Valve
631G Wheel Tractor Power Train Transmission and Transfer Gears - Connect
D3G, D4G and D5G Hystat Track-Type Tractors Power Train Final Drive and Sprocket - Disassemble
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Digital Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
D10R Track-Type Tractor Power Train Chrome Bearing - Remove and Install
2001/10/29 Correction to Disassembly and Assembly , "Bucket-Install" {0645, 6101, 6102}
623G Wheel Tractor-Scraper Machine Systems Check Valve (Carry) - Disassemble
966H and 972H Wheel Loaders Machine Systems Electrohydraulic Control - Remove
621G and 623G Wheel Tractor Power Train Final Drive - Disassemble