Check Valve (Carry) - Install
Installation Procedure
- Clean all parts and inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Position carry-check valve (3). Install bolts (4) .
Show/hide table
 | |
| Illustration 1 | g01073244 |
- Connect tube assembly (5), hose assemblies (1), and hose assemblies (2) onto carry-check valve (3) .
Caterpillar Information System:
2001/10/15 Correction to Disassembly and Assembly , "Track Roller - Install" {4180, 4180}
2001/10/15 Correction to Specification , "Track Rollers" {4180}
966G Series II and 972G Series II Wheel Loaders Engine Supplement Engine Compartment Shield - Remove and Install
980G Series II Wheel Loader Power Train Differential and Final Drive Troubleshooting
980G Series II Wheel Loader Power Train Transmission Troubleshooting
980G Series II Wheel Loader Power Train Torque Converter Troubleshooting
2001/10/15 Correction to Specification , "Track Rollers" {4180}
D6R Series II Track-Type Tractor Hydraulic System Implement Control Valve
D7R and D7R Series II Track-Type Tractor Machine Systems Ripper Tilt Cylinder - Assemble
D3G, D4G and D5G Hystat Track-Type Tractors Engine Supplement Engine Oil Cooler - Remove and Install
2001/10/15 Correction to Specification , "Track Rollers" {4180}
D5N Track-Type Tractor Relief Valve (Torque Converter Outlet)
D10R Track-Type Tractor Engine Supplement Hydraulic Fan Clutch - Remove
D10R Track-Type Tractor Engine Supplement Hydraulic Fan Clutch - Install
2001/10/15 Update to the Testing and Adjusting Module , "Line Relief Valve Test and Adjust" {5051}
2001/10/15 Correction to Disassembly and Assembly , "Track Roller - Install" {4180}
627G Wheel Scraper Power Train Differential and Bevel Gear - Disassemble
D5N Track-Type Tractor Transmission Oil Filter
D3G, D4G and D5G Hystat Track-Type Tractors Power Train Final Drive and Sprocket - Install
631G Wheel Tractor Power Train Transmission, Torque Converter, Transfer Gears and Differential - Install
2001/10/15 Correction to Specification , "Track Rollers" {4180}
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Sensors and Electrical Connectors
631G Wheel Tractor Power Train Transmission and Transfer Gears - Separate
D3G, D4G and D5G Track-Type Tractors Parking Brake