Hydraulic Fan Clutch - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7573 | Link Bracket | 1 |
- Attach Tooling (A) and a suitable lifting device to pulley (15). The weight of pulley (15) is approximately
68 kg (150 lb) . - Install pulley (15) and the fan clutch assembly with bolts (20).
Show/hide table
Illustration 2 g00829282 - Connect tube assemblies (19), (18), and (17).
- Connect connector (16).
Show/hide table
Illustration 3 g00829396 - Slide pulley (15) backward.
- Install bolts (14).
Show/hide table
Illustration 4 g00829269 - Attach a suitable lifting device to fan (13). The weight of the fan is approximately
79 kg (175 lb) . - Install fan (13) with the washers and mounting bolts (12).
Show/hide table
Illustration 5 g00829265 - Install fan guard (10) with bolts (11).
Show/hide table
Illustration 6 g00829261 - Install support (3).
- Install fan guards (4) and (8).
- Connect water hoses (9), (6), and (5).
- Connect water hose assembly (7).
Show/hide table
Illustration 7 g00829243 - Loosen belt tightener (1).
- Place fan drive belts (2) on the pulley.
- Release belt tightener (1).
Refill the cooling system coolant. The capacity of the cooling system coolant is approximately
132 L (34.9 US gal) . Refer to Operation and Maintenance Manual, SEBU7244, "Cooling System Coolant - Change".
Show/hide table
Illustration 1 | g00829300 |
End By:
- Install the hood. Refer to Disassembly and Assembly, "Hood - Install".
Caterpillar Information System:
D10R Track-Type Tractor Engine Supplement Hydraulic Fan Clutch - Remove
623G Wheel Tractor-Scraper Machine Systems Check Valve (Carry) - Install
2001/10/15 Correction to Disassembly and Assembly , "Track Roller - Install" {4180, 4180}
2001/10/15 Correction to Specification , "Track Rollers" {4180}
966G Series II and 972G Series II Wheel Loaders Engine Supplement Engine Compartment Shield - Remove and Install
980G Series II Wheel Loader Power Train Differential and Final Drive Troubleshooting
980G Series II Wheel Loader Power Train Transmission Troubleshooting
980G Series II Wheel Loader Power Train Torque Converter Troubleshooting
2001/10/15 Correction to Specification , "Track Rollers" {4180}
D6R Series II Track-Type Tractor Hydraulic System Implement Control Valve
D7R and D7R Series II Track-Type Tractor Machine Systems Ripper Tilt Cylinder - Assemble
D3G, D4G and D5G Hystat Track-Type Tractors Engine Supplement Engine Oil Cooler - Remove and Install
2001/10/15 Update to the Testing and Adjusting Module , "Line Relief Valve Test and Adjust" {5051}
2001/10/15 Correction to Disassembly and Assembly , "Track Roller - Install" {4180}
627G Wheel Scraper Power Train Differential and Bevel Gear - Disassemble
D5N Track-Type Tractor Transmission Oil Filter
D3G, D4G and D5G Hystat Track-Type Tractors Power Train Final Drive and Sprocket - Install
631G Wheel Tractor Power Train Transmission, Torque Converter, Transfer Gears and Differential - Install
2001/10/15 Correction to Specification , "Track Rollers" {4180}
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Sensors and Electrical Connectors
631G Wheel Tractor Power Train Transmission and Transfer Gears - Separate
D3G, D4G and D5G Track-Type Tractors Parking Brake
D6N Track-Type Tractor Power Train Priority Valve
631G Wheel Tractor Power Train Transmission and Transfer Gears - Connect