Engine Compartment Shield - Remove and Install
Removal Procedure
Start By:
- Remove the radiator and fan group. Refer to Disassembly and Assembly, "Radiator and Fan Group - Remove".
- Disconnect hose assemblies (2) and (3) from hydraulic fan motor (1) .
Show/hide table
Illustration 1 | g00829605 |
- Remove three bolts (4) and the washers. Remove bolt (5), the washer, and the clip. Remove engine compartment shield (6) .
Show/hide table
Illustration 2 | g00829619 |
- Remove nut (7) and the hose assembly from engine compartment shield (6) .
Show/hide table
Illustration 3 | g00829673 |
Installation Procedure
- Install nut (7) and the hose assembly on engine compartment shield (6) .
Show/hide table
Illustration 4 | g00829673 |
- Install engine compartment shield (6) .
Show/hide table
Illustration 5 | g00829619 |
- Install three bolts (4) and the washers. Install bolt (5), the washer, and the clip.
- Connect hose assemblies (2) and (3) to hydraulic fan motor (1) .
Show/hide table
Illustration 6 | g00829605 |
End By: Install the radiator and fan group. Refer to Disassembly and Assembly, "Radiator and Fan Group - Install".
Caterpillar Information System:
980G Series II Wheel Loader Power Train Differential and Final Drive Troubleshooting
980G Series II Wheel Loader Power Train Transmission Troubleshooting
980G Series II Wheel Loader Power Train Torque Converter Troubleshooting
2001/10/15 Correction to Specification , "Track Rollers" {4180}
D6R Series II Track-Type Tractor Hydraulic System Implement Control Valve
D7R and D7R Series II Track-Type Tractor Machine Systems Ripper Tilt Cylinder - Assemble
D3G, D4G and D5G Hystat Track-Type Tractors Engine Supplement Engine Oil Cooler - Remove and Install
2001/10/15 Correction to Specification , "Track Rollers" {4180}
D5N Track-Type Tractor Relief Valve (Torque Converter Outlet)
D7R and D7R Series II Track-Type Tractor Machine Systems Ripper Tilt Cylinder - Disassemble
D7R Track-Type Tractor Engine Supplement Precleaner - Remove and Install
G3500B Engines Compression
2001/10/15 Correction to Specification , "Track Rollers" {4180}
2001/10/15 Correction to Disassembly and Assembly , "Track Roller - Install" {4180, 4180}
623G Wheel Tractor-Scraper Machine Systems Check Valve (Carry) - Install
D10R Track-Type Tractor Engine Supplement Hydraulic Fan Clutch - Remove
D10R Track-Type Tractor Engine Supplement Hydraulic Fan Clutch - Install
2001/10/15 Update to the Testing and Adjusting Module , "Line Relief Valve Test and Adjust" {5051}
2001/10/15 Correction to Disassembly and Assembly , "Track Roller - Install" {4180}
627G Wheel Scraper Power Train Differential and Bevel Gear - Disassemble
D5N Track-Type Tractor Transmission Oil Filter
D3G, D4G and D5G Hystat Track-Type Tractors Power Train Final Drive and Sprocket - Install
631G Wheel Tractor Power Train Transmission, Torque Converter, Transfer Gears and Differential - Install
2001/10/15 Correction to Specification , "Track Rollers" {4180}