Transmission and Transfer Gears - Connect
Connection Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7574     | Link Bracket     | 1     |
Note: Check the O-ring seals, the gaskets and the seals for wear or for damage. Replace the components, if necessary.
- Support the transmission with the cribbing and wedges (1), as shown.
Show/hide table
Illustration 1 | g00517771 |
- Install Tool (A) and a suitable lifting device to transfer gear case (2) .
Show/hide table
Illustration 2 | g00829429 |
- Install O-ring seal (3) to transfer gear case (2). Install five O-ring seals (4) to transmission (5) .
Show/hide table
Illustration 3 | g00829430 |
- Position transfer gear case (2) to transmission (5). Transfer gear case (2) weighs 340 kg (750 lb).
- Install the nuts and bolts (6) that hold transfer gear case (2) to transmission (5).
Show/hide table
Illustration 4 | g00829427 |
- Connect clip (7) .
Show/hide table
Illustration 5 | g00829431 |
End By: Install the transmission, the torque converter, the transfer gears and the differential. Refer to Disassembly and Assembly, "Transmission, Torque Converter, Transfer Gears and Differential - Install".
Caterpillar Information System:
D6N Track-Type Tractor Power Train Priority Valve
D3G, D4G and D5G Track-Type Tractors Parking Brake
631G Wheel Tractor Power Train Transmission and Transfer Gears - Separate
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Sensors and Electrical Connectors
2001/10/15 Correction to Specification , "Track Rollers" {4180}
631G Wheel Tractor Power Train Transmission, Torque Converter, Transfer Gears and Differential - Install
D3G, D4G and D5G Hystat Track-Type Tractors Power Train Final Drive and Sprocket - Install
D5N Track-Type Tractor Transmission Oil Filter
627G Wheel Scraper Power Train Differential and Bevel Gear - Disassemble
2001/10/15 Correction to Disassembly and Assembly , "Track Roller - Install" {4180}
2001/10/15 Update to the Testing and Adjusting Module , "Line Relief Valve Test and Adjust" {5051}
D10R Track-Type Tractor Engine Supplement Hydraulic Fan Clutch - Install
D3G, D4G and D5G Hystat Track-Type Tractors Power Train Final Drive and Sprocket - Disassemble
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Digital Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
D10R Track-Type Tractor Power Train Chrome Bearing - Remove and Install
2001/10/29 Correction to Disassembly and Assembly , "Bucket-Install" {0645, 6101, 6102}
623G Wheel Tractor-Scraper Machine Systems Check Valve (Carry) - Disassemble
966H and 972H Wheel Loaders Machine Systems Electrohydraulic Control - Remove
621G and 623G Wheel Tractor Power Train Final Drive - Disassemble
3056 Engines Engine Oil Pump
D3G, D4G and D5G Hystat Track-Type Tractors Engine Supplement Water Pump - Remove
3056E Industrial Engine Camshaft
2001/11/12 A New Rear Housing Assembly is Available {1157}