C9 Engines for Caterpillar Built Machines Caterpillar


Water Pump - Remove

Usage:

TK711 101

拆卸步骤

------ WARNING! ------

热的冷却液、蒸汽和碱会造成人身伤害。

在工作温度下,发动机冷却液是热的而且处在压力下。 散热器和所有到加热器的管路或发动机中都有热的冷却液或蒸汽。 与它们的任何接触都会造成严重烫伤。

只有当发动机停机且冷却系统压力盖已经冷却到可以徒手触摸时,再慢慢拆下冷却系统压力盖以释放压力。

不要试图在冷却液还热的时候去拧紧软管接头,软管会脱落而造成灼伤。

警告:冷却系统的冷却液添加剂含碱。 应避免它与皮肤和眼睛接触。



注意

在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。

有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。

按照当地法规和要求处置所有液体。


  1. 从冷却系统将冷却液排入合适的容器,以便保存或弃置。 请参阅操作和保养手册, "冷却系统冷却液(ELC)- 更换"。

  2. 拆下皮带。 请参阅操作和保养手册, "皮带 - 检查/更换"。


    图 1g01151111

  3. 拧松管夹 (1)。

  4. 断开软管 (2)。

  5. 拆卸螺栓 (4) 和弯头组件 (5)。

  6. 拆下螺栓 (6)。

  7. 拆下水泵 (3) 和密封垫。

Caterpillar Information System:

C27 and C32 Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
C9 Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
C27 and C32 Engines for Caterpillar Built Machines Fuel Temperature Sensor - Remove and Install
C9 Generator Set Engines Flywheel Housing
2005/05/02 Improved Turbochargers are Available {1052}
C9 Engines for Caterpillar Built Machines Engine Oil Filter Base and Oil Cooler - Install
C3.3 and C4.4 Generator Sets Additional Messages
C27 and C32 Generator Set Engines Engine Oil Pressure Sensor - Remove and Install
2005/03/21 The MIDS Display is Replaced by the Advisor Monitor Display {7490}
C7 and C9 Marine Engines CID 1249 FMI 08 Secondary Throttle Position signal abnormal
C7 and C9 Marine Engines CID 0164 FMI 11 Injector Actuation Pressure system fault
C27 and C32 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines Water Pump - Install
C27 and C32 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
854K Wheel Dozer and 992K Wheel Loader Alternator - Remove and Install
854K Wheel Dozer and 992K Wheel Loader Electric Starting Motor - Remove and Install
C9 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C9 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
C9 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
C9 Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
C9 Engines for Caterpillar Built Machines Front Cover - Remove
3512C Engine Product Description
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.